Christopher H. T. Lee
Orcid: 0000-0001-5132-4126
According to our database1,
Christopher H. T. Lee
authored at least 76 papers
between 2012 and 2024.
Collaborative distances:
Collaborative distances:
Timeline
Legend:
Book In proceedings Article PhD thesis Dataset OtherLinks
Online presence:
-
on orcid.org
On csauthors.net:
Bibliography
2024
Decoupling Analysis of Brushless Dual-Mechanical-Port Dual- Electrical-Port Machines.
IEEE Trans. Ind. Electron., May, 2024
Passive Fault-Tolerant Scheme of a 2 × 3-Phase SPMSM Driven by Mono-Inverter Based on Field Oriented Control.
IEEE Trans. Ind. Informatics, April, 2024
Normal-Operation-Undisturbed Magnet Flux Linkage Monitoring in PMSM Drives via a Mechanical-Model-Based Dual Time-Scale Approach.
IEEE Trans. Ind. Informatics, April, 2024
A Novel Current Measurement Offset Error Compensation Method Based on the Adaptive Extended State Observer for IPMSM Drives.
IEEE Trans. Ind. Electron., April, 2024
Comparison and Analysis of the Consequent Pole Double Stator Hybrid Excitation Machine for Wide Speed Range Driving Applications.
IEEE Trans. Veh. Technol., January, 2024
IEEE Trans. Ind. Electron., 2024
2023
A New Hybrid Concentrated-Winding Concept With Improved Power Factor for Permanent Magnet Vernier Machine.
IEEE Trans. Ind. Electron., November, 2023
Investigation of a Flux-Switching Machine With U-V-Array Permanent Magnet Arrangement for Traction Applications.
IEEE Trans. Veh. Technol., October, 2023
Design and Analysis of Double-Sided Flux Concentrated Permanent Magnet Linear Machine With Saturation Relieving Effect.
IEEE Trans. Ind. Electron., October, 2023
Comprehensive Armature Reaction Modeling and Flux Weakening Optimization of a Surface Permanent Magnet Vernier Motor.
IEEE Trans. Ind. Electron., September, 2023
Design and Analysis of a Variable-Speed Constant-Amplitude Wind Generator for Stand-Alone DC Power Applications.
IEEE Trans. Ind. Electron., August, 2023
Investigation on Stator Shifting Technique for Permanent Magnet Vernier Machines With Two-Slot Pitch Winding.
IEEE Trans. Ind. Electron., July, 2023
A Permanent Magnet Brushless Doubly Fed Electric Machine for Variable-Speed Constant-Frequency Wind Turbines.
IEEE Trans. Ind. Electron., July, 2023
IEEE Trans. Veh. Technol., June, 2023
IEEE Trans. Ind. Electron., June, 2023
Effective Position Error Compensation in Sensorless Control Based on Unified Model of SPMSM and IPMSM.
IEEE Trans. Ind. Informatics, May, 2023
Multi-Objective Optimization Framework of a Radial-Axial Hybrid Excitation Machine for Electric Vehicles.
IEEE Trans. Veh. Technol., February, 2023
Vibration Reduction Design of Consequent Pole PM Machine by Symmetrizing Local and Global Magnetic Field.
IEEE Trans. Ind. Electron., 2023
IEEE Trans. Ind. Electron., 2023
Resilience-Oriented Control for Cyber-Physical Hybrid Energy Storage Systems Using a Semiconsensus Scheme: Design and Practice.
IEEE Trans. Ind. Electron., 2023
Analysis of Contra-Rotating Brushless Integrated Flux-Modulation Machine With Open-Slot Structure for Wind Power Generation.
IEEE Trans. Ind. Electron., 2023
Investigation on Axial-Flux Permanent Magnet Synchronous Motor with High Torque Density and Low Thermal Raise for In-wheel Direct-Drive Electric Bikes.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023
Radial Basis Function Neural Network-Based Inverter Nonlinearity Compensation for PMSM Sensorless Drives.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023
Comprehensive Comparison of Permanent Magnet Synchronous Machine and Vernier Machine.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023
Variable-Topology Motor Drive with Soft-Shifting Method for PMSM Operating Range Extension.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023
2022
Comparative Study and Design Optimization of a Dual-Mechanical-Port Electric Machine for Hybrid Electric Vehicle Applications.
IEEE Trans. Veh. Technol., 2022
Quantitative Comparison on Permanent-Magnet Vernier Machines With Improved Flux Modulation Effect for Automatic Guided Vehicles.
IEEE Trans. Veh. Technol., 2022
Design and Analysis of a Doubly Salient Wound Field Starter Generator for Cost-Effective Automobile Application.
IEEE Trans. Veh. Technol., 2022
Different Active Disturbance Rejection Controllers Based on the Same Order GPI Observer.
IEEE Trans. Ind. Electron., 2022
IEEE Trans. Ind. Electron., 2022
Quantitative Analysis on Maximum Efficiency Point and Specific High-Efficiency Region of Permanent-Magnet Machines.
IEEE Trans. Ind. Electron., 2022
IEEE Trans. Ind. Electron., 2022
A Simple Three-Degree-of-Freedom Digital Current Controller With Dead Beat Response for AC Machines.
IEEE Trans. Ind. Electron., 2022
A Harmonic Injection Method Equivalent to the Resonant Controller for Speed Ripple Reduction of PMSM.
IEEE Trans. Ind. Electron., 2022
IEEE Trans. Ind. Electron., 2022
IEEE Trans. Ind. Electron., 2022
IEEE Trans. Ind. Electron., 2022
High-Resistance Connection Diagnosis in Five-Phase PMSMs Based on the Method of Magnetic Field Pendulous Oscillation and Symmetrical Components.
IEEE Trans. Ind. Electron., 2022
Evaluation of a Contra-Rotating Flux- Modulated Machine Featured With Dual Flux-Modulation for Wind Power Generation.
IEEE Trans. Ind. Electron., 2022
Analysis of Synergistic Stator Permanent Magnet Machine With the Synergies of Flux-Switching and Flux-Reversal Effects.
IEEE Trans. Ind. Electron., 2022
Comparative Study of Two Degree-of-Freedom Rotary-Linear Machines With Permanent-Magnet Mover for High Dynamic Performance.
IEEE Access, 2022
A High Power-Factor Permanent Magnet Vernier Machine with Hybrid Concentrated-Winding.
Proceedings of the IECON 2022, 2022
Robustness Improvement for Deadbeat-Direct Torque and Flux Control of PMSM Using Active Disturbance Rejection Control.
Proceedings of the IECON 2022, 2022
Proceedings of the IECON 2022, 2022
High-order NESO Based Enhanced ADRC for PMSM Drives Considering Uncertainty and Measurement Noise Suppression.
Proceedings of the IECON 2022, 2022
Investigation of the Influence of Full-Pitch and Short-Pitch Windings on Torque and Power Factor of Permanent-Magnet Vernier Machines.
Proceedings of the IECON 2022, 2022
2021
Electromagnetic Force and Vibration Study of Dual-Stator Consequent-Pole Hybrid Excitation Motor for Electric Vehicles.
IEEE Trans. Veh. Technol., 2021
Controller-Based Periodic Disturbance Mitigation Techniques for Three-Phase Two-Level Voltage-Source Converters.
IEEE Trans. Ind. Informatics, 2021
IEEE Trans. Ind. Electron., 2021
A Double-Rotor Flux-Switching Permanent-Magnet Motor for Electric Vehicles With Magnetic Differential.
IEEE Trans. Ind. Electron., 2021
Diagnosis of Open-Phase Faults for a Five-Phase PMSM Fed by a Closed-Loop Vector-Controlled Drive Based on Magnetic Field Pendulous Oscillation Technique.
IEEE Trans. Ind. Electron., 2021
A Critical Review of Advanced Electric Machines and Control Strategies for Electric Vehicles.
Proc. IEEE, 2021
A Consequent-Pole Magnetic-Geared Machine With Axially Embedded Permanent Magnets for Hybrid Electric Vehicle.
IEEE Access, 2021
A Novel Fault Tolerant Flux Switching Memory Machine with Highly Flux-Controllability.
Proceedings of the IECON 2021, 2021
Harmonic Reduction for Two-Slot Pitch Winding Permanent Magnet Vernier Machines with Stator Shifting Technique.
Proceedings of the IECON 2021, 2021
Proceedings of the IECON 2021, 2021
Design of a Decoupled Double-Stator Flux-Switching Permanent-Magnet Rotary-Linear Motor with Two Degree-of-Freedom Motion.
Proceedings of the IECON 2021, 2021
2020
Electric Drives and Power Chargers: Recent Solutions to Improve Performance and Energy Efficiency for Hybrid and Fully Electric Vehicles.
IEEE Veh. Technol. Mag., 2020
Vibration Optimization of FSCW-IPM Motor Based on Iron-Core Modification for Electric Vehicles.
IEEE Trans. Veh. Technol., 2020
IEEE Trans. Veh. Technol., 2020
IEEE Trans. Veh. Technol., 2020
A New Parallel-Hybrid-Excited Permanent-Magnet Machine With Harmonic-Differential Effect for Electric Vehicles.
IEEE Trans. Veh. Technol., 2020
IEEE Trans. Ind. Electron., 2020
Design and Analysis of a New Parallel-Hybrid-Excited Machine With Harmonic-Shift Structure.
IEEE Trans. Ind. Electron., 2020
2019
Guest Editorial: Special Section on Identification and Observation Informatics for Energy Generation, Conversion, and Applications.
IEEE Trans. Ind. Informatics, 2019
IEEE Trans. Ind. Electron., 2019
Parametric Sensitivity Analysis and Design Optimization of an Interior Permanent Magnet Synchronous Motor.
IEEE Access, 2019
Proceedings of the IECON 2019, 2019
2016
Design and Analysis of an Electronic-Geared Magnetless Machine for Electric Vehicles.
IEEE Trans. Ind. Electron., 2016
2015
A new fault-tolerant flux-reversal doubly-salient magnetless motor drive with four-phase topology.
Proceedings of the IECON 2015, 2015
2013
Proceedings of the 22nd IEEE International Symposium on Industrial Electronics, 2013
Proceedings of the 22nd IEEE International Symposium on Industrial Electronics, 2013
Design and analysis of a DC field multitooth switched reluctance machine by using soft-magnetic-composite material.
Proceedings of the 22nd IEEE International Symposium on Industrial Electronics, 2013
2012
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012
A dual-memory permanent magnet brushless machine for automotive integrated starter-generator application.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012
Optimal design and implementation of a permanent magnet linear vernier machine for direct-drive wave energy extraction.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012