Wenxiang Zhao

According to our database1, Wenxiang Zhao authored at least 73 papers between 2008 and 2023.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Other 

Links

On csauthors.net:

Bibliography

2023
Vibration Reduction Design of Consequent Pole PM Machine by Symmetrizing Local and Global Magnetic Field.
IEEE Trans. Ind. Electron., 2023

Improved Model Predictive Current Control for Linear Vernier Permanent-Magnet Motor With Efficient Voltage Vectors Selection.
IEEE Trans. Ind. Electron., 2023

Analysis of Split-Tooth Stator PM Vernier Machines With Zero-Sequence Current Excitation.
IEEE Trans. Ind. Electron., 2023

2022
A Hybrid Analytical Model for Permanent Magnet Vernier Machines Considering Saturation Effect.
IEEE Trans. Ind. Electron., 2022

Modulated Vibration Reduction Design for Integral-Slot Interior Permanent Magnet Synchronous Machines.
IEEE Trans. Ind. Electron., 2022

Quantitative Analysis on Maximum Efficiency Point and Specific High-Efficiency Region of Permanent-Magnet Machines.
IEEE Trans. Ind. Electron., 2022

Analysis and Reduction of Electromagnetic Vibration in Fractional-Slot Concentrated-Windings PM Machines.
IEEE Trans. Ind. Electron., 2022

Phase Shift Technique to Improve Torque of Synchronous Reluctance Machines With Dual M-Phase Windings.
IEEE Trans. Ind. Electron., 2022

Analysis of Rotor Losses in Permanent Magnet Vernier Machines.
IEEE Trans. Ind. Electron., 2022

Meshless Generalized Finite Difference Method to Analyze Electromagnetic Performance of SPM Machines With Eccentric Rotor Shape.
IEEE Trans. Ind. Electron., 2022

Effect of Phase Shift on Inductance and Short-Circuit Current in Dual Three-Phase 48-Slot/22-Pole Permanent-Magnet Machines.
IEEE Trans. Ind. Electron., 2022

A Novel Parallel Hybrid Excitation Field Modulated Machine With Efficient Utilization of Multiworking Harmonics.
IEEE Trans. Ind. Electron., 2022

Analysis and Design of a Fault-Tolerant Permanent Magnet Vernier Machine With Improved Power Factor.
IEEE Trans. Ind. Electron., 2022

Magneto-Electric Coupling Network Model for Reduction of PM Eddy Current Loss in Flux-Switching Permanent Magnet Machine.
IEEE Trans. Ind. Electron., 2022

Adjustable Model Predictive Control for IPMSM Drives Based on Online Stator Inductance Identification.
IEEE Trans. Ind. Electron., 2022

Airgap Magnetic Field Harmonic Synergetic Optimization Approach for Power Factor Improvement of PM Vernier Machines.
IEEE Trans. Ind. Electron., 2022

2021
Three-Vector-Based Model Predictive Current Control With Zero-Sequence Current Suppression for Open-Winding LPMVM Drives.
IEEE Trans. Veh. Technol., 2021

Effect of Phase Shift Angle on Radial Force and Vibration Behavior in Dual Three-Phase PMSM.
IEEE Trans. Ind. Electron., 2021

Multi-Objective Optimization Design of a Modular Linear Permanent-Magnet Vernier Machine by Combined Approximation Models and Differential Evolution.
IEEE Trans. Ind. Electron., 2021

A Generalized Mesh-Based Thermal Network Model for SPM Machines Combining Coupled Winding Solution.
IEEE Trans. Ind. Electron., 2021

Design and Optimization of a Fault Tolerant Modular Permanent Magnet Assisted Synchronous Reluctance Motor With Torque Ripple Minimization.
IEEE Trans. Ind. Electron., 2021

Vibration Investigation of Spoke-Type PM Machine With Asymmetric Rotor Considering Modulation Effect of Stator Teeth.
IEEE Trans. Ind. Electron., 2021

Analysis and Evaluation of a Linear Primary Permanent Magnet Vernier Machine With Multiharmonics.
IEEE Trans. Ind. Electron., 2021

Design and Manufacture of a Linear Actuator Based on Magnetic Screw Transmission.
IEEE Trans. Ind. Electron., 2021

Parametric Equivalent Magnetic Network Modeling Approach for Multiobjective Optimization of PM Machine.
IEEE Trans. Ind. Electron., 2021

Effect of Postures and Cutting Process on Robot Milling Performance and Surface Quality.
Proceedings of the Intelligent Robotics and Applications - 14th International Conference, 2021

2020
Torque Improvement in Dual M-Phase Permanent-Magnet Machines by Phase Shift for Electric Ship Applications.
IEEE Trans. Veh. Technol., 2020

Mechanism Investigation of Ring Type Winding in Linear Permanent Magnet Vernier Machine for Improving Force Density.
IEEE Trans. Veh. Technol., 2020

A Novel Dual-Permanent-Magnet-Excited Machine With Non-Uniformly Distributed Permanent-Magnets and Flux Modulation Poles on the Stator.
IEEE Trans. Veh. Technol., 2020

Analysis of PM Eddy Current Loss in Four-Phase Fault-Tolerant Flux-Switching Permanent-Magnet Machines by Air-Gap Magnetic Field Modulation Theory.
IEEE Trans. Ind. Electron., 2020

Multiobjective Optimization of a Double-Side Linear Vernier PM Motor Using Response Surface Method and Differential Evolution.
IEEE Trans. Ind. Electron., 2020

Design Considerations of Fault-Tolerant Permanent Magnet Vernier Machine.
IEEE Trans. Ind. Electron., 2020

Effects of Magnet Shape on Torque Capability of Surface-Mounted Permanent Magnet Machine for Servo Applications.
IEEE Trans. Ind. Electron., 2020

2019
Design Optimization of a Spoke-Type Permanent-Magnet Vernier Machine for Torque Density and Power Factor Improvement.
IEEE Trans. Veh. Technol., 2019

Improvement of Power Factor in a Double-Side Linear Flux-Modulation Permanent-Magnet Motor for Long Stroke Applications.
IEEE Trans. Ind. Electron., 2019

Principle of Torque-Angle Approaching in a Hybrid Rotor Permanent-Magnet Motor.
IEEE Trans. Ind. Electron., 2019

Extension of Virtual-Signal-Injection-Based MTPA Control for Five-Phase IPMSM Into Fault-Tolerant Operation.
IEEE Trans. Ind. Electron., 2019

2018
Dynamic Performance Improvement of Five-Phase Permanent-Magnet Motor With Short-Circuit Fault.
IEEE Trans. Ind. Electron., 2018

Design to Reduce Rotor Losses in Fault-Tolerant Permanent-Magnet Machines.
IEEE Trans. Ind. Electron., 2018

Star and Delta Hybrid Connection of a FSCW PM Machine for Low Space Harmonics.
IEEE Trans. Ind. Electron., 2018

Fault-Tolerant Direct Thrust Force Control for a Dual Inverter Fed Open-End Winding Linear Vernier Permanent-Magnet Motor Using Improved SVPWM.
IEEE Trans. Ind. Electron., 2018

Sensorless Control of a Linear Permanent-Magnet Motor Based on an Improved Disturbance Observer.
IEEE Trans. Ind. Electron., 2018

Unity Power Factor Fault-Tolerant Control of Linear Permanent-Magnet Vernier Motor Fed by a Floating Bridge Multilevel Inverter With Switch Fault.
IEEE Trans. Ind. Electron., 2018

Adaptive Sliding Mode Fault-Tolerant Coordination Control for Four-Wheel Independently Driven Electric Vehicles.
IEEE Trans. Ind. Electron., 2018

Permanent Magnet Shape Using Analytical Feedback Function for Torque Improvement.
IEEE Trans. Ind. Electron., 2018

Design Optimization and Test of a Radially Magnetized Magnetic Screw With Discretized PMs.
IEEE Trans. Ind. Electron., 2018

Torque Ripple Reduction in Five-Phase IPM Motors by Lowering Interactional MMF.
IEEE Trans. Ind. Electron., 2018

A Novel Redundant Continuum Manipulator with Variable Geometry Trusses.
Proceedings of the Intelligent Robotics and Applications - 11th International Conference, 2018

2017
Remedial Field-Oriented Control of Five-Phase Fault-Tolerant Permanent-Magnet Motor by Using Reduced-Order Transformation Matrices.
IEEE Trans. Ind. Electron., 2017

Hybrid Stator Design of Fault-Tolerant Permanent-Magnet Vernier Machines for Direct-Drive Applications.
IEEE Trans. Ind. Electron., 2017

A Novel MTPA Control Strategy for IPMSM Drives by Space Vector Signal Injection.
IEEE Trans. Ind. Electron., 2017

Modular Reluctance Network Simulation of a Linear Permanent-Magnet Vernier Machine Using New Mesh Generation Methods.
IEEE Trans. Ind. Electron., 2017

Trend prediction of wear fault of wind generator high-speed gear using a fusion of UICA and PE method.
Clust. Comput., 2017

Comparison of two linear hybrid excitation flux reversal machines with different permanent-magnet arrays.
Proceedings of the 26th IEEE International Symposium on Industrial Electronics, 2017

A new fault-tolerance motor with decoupled reluctance channel and PM channel.
Proceedings of the 26th IEEE International Symposium on Industrial Electronics, 2017

Direct thrust force control of open-end winding linear vernier permanent-magnet motor with reduced force ripple.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017

2016
Design and Analysis of a Linear Permanent- Magnet Vernier Machine With Improved Force Density.
IEEE Trans. Ind. Electron., 2016

2014
Design and Comparison of Two Fault-Tolerant Interior-Permanent-Magnet Motors.
IEEE Trans. Ind. Electron., 2014

Tension identification of two-motor system based on neural network left-inverse.
Proceedings of the 2014 International Joint Conference on Neural Networks, 2014

2013
Internal Model Control of Permanent Magnet Synchronous Motor Using Support Vector Machine Generalized Inverse.
IEEE Trans. Ind. Informatics, 2013

Remedial Injected-Harmonic-Current Operation of Redundant Flux-Switching Permanent-Magnet Motor Drives.
IEEE Trans. Ind. Electron., 2013

Multi-phase fault-tolerant switched-flux permanent magnet motors having odd rotor pole number.
Proceedings of the 22nd IEEE International Symposium on Industrial Electronics, 2013

Study on Conditional Autoregressive Model of Per Capita Grain Possession in Yellow River Delta.
Proceedings of the Computer and Computing Technologies in Agriculture VII, 2013

Research and Design of One Webpage System for Each Village in Shandong Province.
Proceedings of the Computer and Computing Technologies in Agriculture VII, 2013

2012
Electromagnetic performances analysis of a new magnetic-planetary-geared permanent magnet brushless machine for hybrid electric vehicles.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

A new tubular fault-tolerant permanent-magnet motor for active vehicle suspension.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

Comparison Of Two Interior Permanent-Magnet Motors With Improved Fault-Tolerance.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

2011
Back-EMF Harmonic Analysis and Fault-Tolerant Control of Flux-Switching Permanent-Magnet Machine With Redundancy.
IEEE Trans. Ind. Electron., 2011

Overview of Stator-Permanent Magnet Brushless Machines.
IEEE Trans. Ind. Electron., 2011

A New Model Reference Adaptive Control of PMSM Using Neural Network Generalized Inverse.
Proceedings of the Advances in Neural Networks - ISNN 2011, 2011

RBF Neural Network Application in Internal Model Control of Permanent Magnet Synchronous Motor.
Proceedings of the Advances in Neural Networks - ISNN 2011, 2011

2010
Remedial Brushless AC Operation of Fault-Tolerant Doubly Salient Permanent-Magnet Motor Drives.
IEEE Trans. Ind. Electron., 2010

2008
Analysis of Fault-Tolerant Performance of a Doubly Salient Permanent-Magnet Motor Drive Using Transient Cosimulation Method.
IEEE Trans. Ind. Electron., 2008


  Loading...