Guizhen Yan

According to our database1, Guizhen Yan authored at least 41 papers between 2009 and 2024.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2024
A Side-Channel Hardware Trojan Detection Method Based on Fuzzy C-Means Clustering and Fusion Distance Algorithms.
IEEE Internet Things J., April, 2024

2023
A Noncontact Fall Detection Method for Bedside Application With a MEMS Infrared Sensor and a Radar Sensor.
IEEE Internet Things J., July, 2023

2021
A 0.084% Nonlinearity Open-Loop Capacitive Micro-Accelerometer with On-Chip Digital Nonlinearity Calibration and Embedded EEPROM.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2021

2020
An Interface ASIC for an Atmospheric-Pressure MEMS Gyroscope with PLL-Based Phase Adjustment and SC Amplitude Regulation.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2020

2018
A Low-Noise High-G Closed-Loop Capacitive Accelerometer Using DC-Blocking Technique for Reduction of Power Dissipation.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2018

2017
An electrical-coupling-suppressing MEMS gyroscope with feed-forward coupling compensation and scalable fuzzy control.
Sci. China Inf. Sci., 2017

Research on the ring-diode based readout circuit for MEMS vibratory gyroscopes.
Proceedings of the 12th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2017

Research on the Zero-Rate Output compensation for MEMS vibratory gyroscopes.
Proceedings of the 12th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2017

A novel method to measure the sidewall angle of MEMS structures.
Proceedings of the 2017 IEEE SENSORS, Glasgow, United Kingdom, October 29, 2017

2015
Investigation of reliability of MEMS gyroscopes under different shock conditions.
Proceedings of the 10th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2015

A novel scale factor calibration method for a MEMS gyroscope based on virtual coriolis force.
Proceedings of the 10th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2015

A method to evaluate the influence of different substrate on stress mismatch induced deformation in MEMS accelerometer.
Proceedings of the 10th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2015

Research on the resonant frequency of MEMS gyroscopes under varying tuning voltage.
Proceedings of the 10th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2015

A temperature control system used for improving resonant frequency drift of MEMS gyroscopes.
Proceedings of the 10th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2015

2014
Designing of a micromachined gyroscope system with a closed-loop DC biased interface ASIC.
Sci. China Inf. Sci., 2014

A CMOS compatible process for monolithic integration of high-aspect-ratio bulk silicon microstructures.
Sci. China Inf. Sci., 2014

Digital fast startup procedure for micro-machined vibratory gyroscopes using optimized fuzzy control strategy.
Proceedings of the 9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2014

Design of a digital closed control loop for the sense mode of a mode-matching MEMS vibratory gyroscope.
Proceedings of the 9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2014

2013
MEMS gyroscope control system using a band-pass continuous-time sigma-delta modulator.
Sci. China Inf. Sci., 2013

Digital closed-loop driver design of micromechanical gyroscopes based on coordinated rotation digital computer algorithm.
Proceedings of the 8th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2013

2012
A capacitive readout circuit with DC sensing method for micromachined gyroscopes.
Proceedings of the 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2012

A silicon-on-glass Z-axis accelerometer with vertical sensing comb capacitors.
Proceedings of the 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2012

A research of the bandwidth of a mode-matching MEMS vibratory gyroscope.
Proceedings of the 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2012

Fast self-resonant startup procedure for digital MEMS gyroscope system.
Proceedings of the 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2012

2011
A novel acceleration switch with hat-like contact separated from proof mass.
Proceedings of the 6th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2011

Post CMOS integration of high aspect ratio SOI MEMS devices.
Proceedings of the 6th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2011

CMOS compatible process for suspended high-aspect-ratio integrated silicon microstructures.
Proceedings of the 6th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2011

Digital closed-loop controller design of a micromachined gyroscope based on auto frequency swept.
Proceedings of the 6th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2011

Fabrication and testing of a novel silicon probe for micromachined surface profilers.
Proceedings of the 6th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2011

A method to reduce notching effect on the anchors of a micro-gyroscope.
Proceedings of the 6th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2011

Improvement of transient response for drive loop of microgyroscope using 2-DOF PID controller.
Proceedings of the 6th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2011

2010
A single mask dry releasing process for making high aspect ratio soimemsdevices.
Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2010

Fabrication of Sub-100-nm silicon nanowire devices on SOI wafer by CMOS compatible fabrication process.
Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2010

Fabrication of ultra-deep high-aspect-ratio isolation trench without void and its application.
Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2010

Residual stress characterization of GaN microstructures using bent-beam strain sensors.
Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2010

An FPGA implementation of the LMS adaptive filter for MEMS gyroscope.
Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2010

Design and fabrication of a novel silicon probe for micromachined surface profilers.
Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2010

Design and fabrication of a mems capacitive accelerometer based on double-device-layers SOI wafer.
Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2010

2009
The method of prevent footing effect in making SOI micro-mechanical structure.
Proceedings of the 4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2009

An improved method to remove anti-footing Al layer after DRIE.
Proceedings of the 4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2009

Performance comparison of methods to evading notching effect for SOG structures in DRIE.
Proceedings of the 4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2009


  Loading...