Zhenchuan Yang

According to our database1, Zhenchuan Yang authored at least 40 papers between 2009 and 2023.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2023
Quantitative Analysis Method and Correction Algorithm Based on Directivity Beam Pattern for Mismatches between Sensitive Units of Acoustic Dyadic Sensors.
Sensors, 2023

Towards an Exploratory Visual Analytics System for Griefer Identification in MOBA Games.
CoRR, 2023

ActorLens: Visual Analytics for High-level Actor Identification in MOBA Games.
CoRR, 2023

A micro and low-cost packaging technology of high accuracy piezoresistive pressure sensors with Parylene coating.
Proceedings of the 18th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2023

2021
Design and Optimization of Sensitivity Enhancement Package for MEMS-Based Thermal Acoustic Particle Velocity Sensor.
Sensors, 2021

Cross-Lingual Voice Conversion with Disentangled Universal Linguistic Representations.
Proceedings of the Interspeech 2021, 22nd Annual Conference of the International Speech Communication Association, Brno, Czechia, 30 August, 2021

Non-Parallel Any-to-Many Voice Conversion by Replacing Speaker Statistics.
Proceedings of the Interspeech 2021, 22nd Annual Conference of the International Speech Communication Association, Brno, Czechia, 30 August, 2021

2019
Essence Knowledge Distillation for Speech Recognition.
CoRR, 2019

2017
An electrical-coupling-suppressing MEMS gyroscope with feed-forward coupling compensation and scalable fuzzy control.
Sci. China Inf. Sci., 2017

Research on the ring-diode based readout circuit for MEMS vibratory gyroscopes.
Proceedings of the 12th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2017

Research on the Zero-Rate Output compensation for MEMS vibratory gyroscopes.
Proceedings of the 12th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2017

2015
Investigation of reliability of MEMS gyroscopes under different shock conditions.
Proceedings of the 10th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2015

A novel scale factor calibration method for a MEMS gyroscope based on virtual coriolis force.
Proceedings of the 10th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2015

A method to evaluate the influence of different substrate on stress mismatch induced deformation in MEMS accelerometer.
Proceedings of the 10th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2015

Research on the resonant frequency of MEMS gyroscopes under varying tuning voltage.
Proceedings of the 10th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2015

A temperature control system used for improving resonant frequency drift of MEMS gyroscopes.
Proceedings of the 10th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2015

2014
A CMOS compatible process for monolithic integration of high-aspect-ratio bulk silicon microstructures.
Sci. China Inf. Sci., 2014

Digital fast startup procedure for micro-machined vibratory gyroscopes using optimized fuzzy control strategy.
Proceedings of the 9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2014

2013
MEMS gyroscope control system using a band-pass continuous-time sigma-delta modulator.
Sci. China Inf. Sci., 2013

Digital closed-loop driver design of micromechanical gyroscopes based on coordinated rotation digital computer algorithm.
Proceedings of the 8th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2013

2012
A capacitive readout circuit with DC sensing method for micromachined gyroscopes.
Proceedings of the 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2012

A silicon-on-glass Z-axis accelerometer with vertical sensing comb capacitors.
Proceedings of the 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2012

A research of the bandwidth of a mode-matching MEMS vibratory gyroscope.
Proceedings of the 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2012

Fast self-resonant startup procedure for digital MEMS gyroscope system.
Proceedings of the 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2012

2011
A novel acceleration switch with hat-like contact separated from proof mass.
Proceedings of the 6th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2011

Post CMOS integration of high aspect ratio SOI MEMS devices.
Proceedings of the 6th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2011

CMOS compatible process for suspended high-aspect-ratio integrated silicon microstructures.
Proceedings of the 6th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2011

Digital closed-loop controller design of a micromachined gyroscope based on auto frequency swept.
Proceedings of the 6th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2011

Fabrication and testing of a novel silicon probe for micromachined surface profilers.
Proceedings of the 6th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2011

A method to reduce notching effect on the anchors of a micro-gyroscope.
Proceedings of the 6th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2011

Improvement of transient response for drive loop of microgyroscope using 2-DOF PID controller.
Proceedings of the 6th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2011

2010
A single mask dry releasing process for making high aspect ratio soimemsdevices.
Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2010

Fabrication of Sub-100-nm silicon nanowire devices on SOI wafer by CMOS compatible fabrication process.
Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2010

Fabrication of ultra-deep high-aspect-ratio isolation trench without void and its application.
Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2010

Residual stress characterization of GaN microstructures using bent-beam strain sensors.
Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2010

An FPGA implementation of the LMS adaptive filter for MEMS gyroscope.
Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2010

Design and fabrication of a novel silicon probe for micromachined surface profilers.
Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2010

2009
The method of prevent footing effect in making SOI micro-mechanical structure.
Proceedings of the 4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2009

An improved method to remove anti-footing Al layer after DRIE.
Proceedings of the 4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2009

Performance comparison of methods to evading notching effect for SOG structures in DRIE.
Proceedings of the 4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2009


  Loading...