Yilong Hao
According to our database1,
Yilong Hao
authored at least 26 papers
between 2006 and 2023.
Collaborative distances:
Collaborative distances:
Timeline
Legend:
Book In proceedings Article PhD thesis Dataset OtherLinks
On csauthors.net:
Bibliography
2023
Quantitative Analysis Method and Correction Algorithm Based on Directivity Beam Pattern for Mismatches between Sensitive Units of Acoustic Dyadic Sensors.
Sensors, 2023
A micro and low-cost packaging technology of high accuracy piezoresistive pressure sensors with Parylene coating.
Proceedings of the 18th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2023
2021
Design and Optimization of Sensitivity Enhancement Package for MEMS-Based Thermal Acoustic Particle Velocity Sensor.
Sensors, 2021
2019
Toward Reliable Extraction of the Properties of Border Traps in Lateral GaN Power MOSFET with a Distributed Network Model.
Proceedings of the International Conference on IC Design and Technology, 2019
A method for real-time measurement of seismic isolation rubber bearing based on embedded MEMS pressure sensors.
Proceedings of the International Conference on IC Design and Technology, 2019
High-Performance Quasi-Vertical GaN Schottky Barrier Diode on Silicon Substrate with a Low Dislocation Density Drift Layer.
Proceedings of the International Conference on IC Design and Technology, 2019
A Gas Medium Approach To Sensitivity Improvement Of MEMS-Based Thermal Acoustic Particle Velocity Sensors.
Proceedings of the International Conference on IC Design and Technology, 2019
2017
Design of an ultra-low pressure sensor based on the growth of graphene on silicon dioxide surface.
Proceedings of the 12th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2017
Anemometer for detection of very low speed air flow with three-dimensional directionality.
Proceedings of the 12th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2017
2016
Proceedings of the 11th IEEE Annual International Conference on Nano/Micro Engineered and Molecular Systems, 2016
Design and simulation of MEMS thermal and vibration isolator based on PDMS beam arrays.
Proceedings of the 11th IEEE Annual International Conference on Nano/Micro Engineered and Molecular Systems, 2016
Design and simulation of corrugated diaphragm applied to the MEMS fiber optic pressure sensor.
Proceedings of the 11th IEEE Annual International Conference on Nano/Micro Engineered and Molecular Systems, 2016
Proceedings of the 2016 International Joint Conference on Neural Networks, 2016
2015
Design and simulation of micro-platform for MEMS devices applied in shock environment.
Proceedings of the 10th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2015
Proceedings of the 10th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2015
Proceedings of the 10th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2015
2014
Linearity analysis of closed-loop capacitive accelerometer due to distance mismatch between plates and the influence of compensation capacitor array.
Sci. China Inf. Sci., 2014
Proceedings of the 9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2014
2012
High temperature induced failure in Ti/Al/Ni/Au Ohmic contacts on AlGaN/GaN heterostructure.
Microelectron. Reliab., 2012
2011
Design of a novel low cross-axis sensitivity micro-gravity sandwich capacitance accelerometer.
Proceedings of the 6th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2011
Improvement of transient response for drive loop of microgyroscope using 2-DOF PID controller.
Proceedings of the 6th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2011
2010
Parylene-coated NMOSFET-embedded cantilevers for surface stress sensing in liquid environment.
Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2010
A surface micromachining process utilizing dual metal sacrificial layer for fabrication of RF MEMS switch.
Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2010
Design and fabrication of a mems capacitive accelerometer based on double-device-layers SOI wafer.
Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2010
2009
Fabrication of complicated three dimensional structures utilizing multi-stack bonding.
Proceedings of the 4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2009
2006
Modeling and simulation development of electron beam resist based on cellular automata.
Microelectron. J., 2006