Jan Wikander

According to our database1, Jan Wikander authored at least 30 papers between 1992 and 2020.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2020
Fuel Minimization of the Electric Engine Cooling System With Active Grille Shutter by Iterative Quadratic Programming.
IEEE Trans. Veh. Technol., 2020

2019
A Binary Controller to Ensure Engine Peak Efficiency for a Parallel Hybrid Electric Car.
Proceedings of the 2019 IEEE Intelligent Transportation Systems Conference, 2019

2018
Increasing Fuel Efficiency of a Hybrid Electric Competition Car by a Binary Equivalent Consumption Minimization Strategy.
Proceedings of the 14th IEEE International Conference on Automation Science and Engineering, 2018

2017
Toward a new force sensor for twisted string actuator: A study about the force on separator.
Proceedings of the 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2017

Features Extraction from CAD as a Basis for Assembly Process Planning.
Proceedings of the Technological Innovation for Smart Systems, 2017

Early Phase Design-Optimization of Mechatronic Systems.
Proceedings of the 5th International Conference on Control, Mechatronics and Automation, 2017

2016
Ontological Approach to Share Product Design Semantics for an Assembly.
Proceedings of the 8th International Joint Conference on Knowledge Discovery, Knowledge Engineering and Knowledge Management (IC3K 2016) - Volume 2: KEOD, Porto - Portugal, November 9, 2016

2015
Jacobian Matrix Normalization - A Comparison of Different Approaches in the Context of Multi-Objective Optimization of 6-DOF Haptic Devices.
J. Intell. Robotic Syst., 2015

Managing dependencies in mechatronic design: a case study on dependency management between mechanical design and system design.
Eng. Comput., 2015

2014
Holistic design methodology for mechatronic systems.
J. Syst. Control. Eng., 2014

One-Step Prediction for Improving Gear Changing Control of HEVs.
J. Robotics Mechatronics, 2014

Assembly Features Utilization to Support Production System Adaptation.
Proceedings of the Technological Innovation for Collective Awareness Systems, 2014

Predictive control of the engine cooling system for fuel efficiency improvement.
Proceedings of the 2014 IEEE International Conference on Automation Science and Engineering, 2014

2013
Fuel efficiency improvement in HEVs using electromechanical brake system.
Proceedings of the 2013 IEEE Intelligent Vehicles Symposium (IV), 2013

Improving fuel economy and robustness of an improved ECMS method.
Proceedings of the 10th IEEE International Conference on Control and Automation, 2013

A real-time optimal control method for swing-free tower crane motions.
Proceedings of the 2013 IEEE International Conference on Automation Science and Engineering, 2013

Optimal design of harmonic drive servo.
Proceedings of the 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2013

2012
Dependency Modeling and Model Management in Mechatronic Design.
J. Comput. Inf. Sci. Eng., 2012

A 6 Degrees-of-Freedom Haptic Milling Simulator for Surgical Training of Vertebral Operations.
Proceedings of the Medicine Meets Virtual Reality 19 - NextMed, 2012

2011
Dynamic based control strategy for haptic devices.
Proceedings of the IEEE World Haptics Conference, 2011

2009
Demonstration-based learning and control for automatic grasping.
Intell. Serv. Robotics, 2009

Real life grasping using an under-actuated robot hand - Simulation and experiments.
Proceedings of the 14th International Conference on Advanced Robotics, 2009

2006
The PVT, an Elastic Conservative Transmission.
Int. J. Robotics Res., 2006

2005
Tactile sensing in intelligent robotic manipulation - a review.
Ind. Robot, 2005

2003
Transparency and Stability Analysis of a Surgical Teleoperator System.
Proceedings of the 11th International Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems (HAPTICS 2003), 2003

2002
Control Design for Transparent Teleoperators with Model Parameter Variation.
Proceedings of the 2002 IEEE International Conference on Robotics and Automation, 2002

2001
The science and education of mechatronics engineering.
IEEE Robotics Autom. Mag., 2001

Combining control design tools - from modeling to implementation.
Proceedings of the 2001 IEEE International Conference on Robotics and Automation, 2001

1998
Editorial.
Real Time Syst., 1998

1992
Real-Time Systems in the Field of Mechatronics.
Proceedings of the Real Time Computing, 1992


  Loading...