Manos M. Tentzeris

Orcid: 0000-0003-0476-3577

According to our database1, Manos M. Tentzeris authored at least 74 papers between 2001 and 2023.

Collaborative distances:

Awards

IEEE Fellow

IEEE Fellow 2010, "For contributions to three dimensional conformal integrated devices for wireless communications and sensing".

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2023
Artificial intelligence (AI) and machine learning (ML) for beyond 5G/6G communications.
EURASIP J. Wirel. Commun. Netw., December, 2023

Super Realized Gain Antenna Array.
CoRR, 2023

2022
Energy-Efficient Harmonic Transponder Based on On-Off Keying Modulation for Both Identification and Sensing.
Sensors, 2022

The New Era of Long-Range "Zero-Interception" Ambient Backscattering Systems: 130 m with 130 nA Front-End Consumption.
Sensors, 2022

Advances in Wirelessly Powered Backscatter Communications: From Antenna/RF Circuitry Design to Printed Flexible Electronics.
Proc. IEEE, 2022

2021
Triple-Band Single-Layer Rectenna for Outdoor RF Energy Harvesting Applications.
Sensors, 2021

Holography-Based Target Localization and Health Monitoring Technique Using UHF Tags Array.
IEEE Internet Things J., 2021

Duco: Autonomous Large-Scale Direct-Circuit-Writing (DCW) on Vertical Everyday Surfaces Using A Scalable Hanging Plotter.
Proc. ACM Interact. Mob. Wearable Ubiquitous Technol., 2021

5G/mm-Wave Next Generation RFID Systems for Future IoT Applications.
Proceedings of the IEEE International Conference on RFID Technology and Applications, 2021

Digital Spectrum Twinning and the Role of RFID and Backscatter Communications in Spectral Sensing.
Proceedings of the IEEE International Conference on RFID Technology and Applications, 2021

When a Single Chip becomes the RFID Reader: An Ultra-low-cost 60 GHz Reader and mmID System for Ultra-accurate 2D Microlocalization.
Proceedings of the IEEE International Conference on RFID, 2021

Dual-Band Frequency Selective Surface Design Using Harris Hawks Optimization.
Proceedings of the 10th International Conference on Modern Circuits and Systems Technologies, 2021

2020
A Novel Compact Isolation Circuit Suitable for Ultracompact and Wideband Marchand Baluns.
IEEE Trans. Circuits Syst. II Express Briefs, 2020

Wearable Antennas for Cross-Body Communication and Human Activity Recognition.
IEEE Access, 2020

RFID Based Non-Contact Human Activity Detection Exploiting Cross Polarization.
IEEE Access, 2020

A Bidirectional Absorptive Common-Mode Filter Based on Interdigitated Microstrip Coupled Lines for 5G "Green" Communications.
IEEE Access, 2020

3D-Printed Omnidirectional Luneburg Lens Retroreflectors for Low-Cost mm-Wave Positioning.
Proceedings of the IEEE International Conference on RFID, 2020

2019
Bi-Directional Loop Antenna Array Using Magic Cube Origami.
Sensors, 2019

Hybrid Printed Energy Harvesting Technology for Self-Sustainable Autonomous Sensor Application.
Sensors, 2019

Guest Editorial Special Issue on Intrinsic Hardware Security for Internet of Things Infrastructure.
IEEE Internet Things J., 2019

Ultra-Compact and Wideband V(U)HF 3-dB Power Dividers Consisting of Novel Asymmetric Impedance Transformers.
IEEE Access, 2019

Complex Impedance Transformers Based on Allowed and Forbidden Regions.
IEEE Access, 2019

Compact and Wideband General Coupled-Line Ring Hybrids (GCRHs) for Arbitrary Circumferences and Arbitrary Power-Division Ratios.
IEEE Access, 2019

In-Phase T-Junction: Study and Application to Gysel Power Dividers for High Power-Division Ratios Requiring No High-Impedance Transmission-Line Section.
IEEE Access, 2019

2018
Design of Inkjet-Printed RFID-Based Sensor on Paper: Single- and Dual-Tag Sensor Topologies.
Sensors, 2018

2017
Smart Test Strips: Next-Generation Inkjet-Printed Wireless Comprehensive Liquid Sensing Platforms.
IEEE Trans. Ind. Electron., 2017

A Novel Wideband Compact Microstrip Coupled-Line Ring Hybrid for Arbitrarily High Power-Division Ratios.
IEEE Trans. Circuits Syst. II Express Briefs, 2017

Additively Manufactured RF Components and Modules: Toward Empowering the Birth of Cost-Efficient Dense and Ubiquitous IoT Implementations.
Proc. IEEE, 2017

A low-cost, single platform, hybrid manufacturing system for RF passives.
Proceedings of the 2017 IEEE Radio and Wireless Symposium, 2017

Backscatter morse leaf sensor for agricultural wireless sensor networks.
Proceedings of the 2017 IEEE SENSORS, Glasgow, United Kingdom, October 29, 2017

2016
A novel wideband and circularly polarized cross-dipole antenna.
Wirel. Commun. Mob. Comput., 2016

Additive manufacturing technologies for near-and far-field energy harvesting applications.
Proceedings of the 2016 IEEE Radio and Wireless Symposium, 2016

2015
Additively Manufactured Nanotechnology and Origami-Enabled Flexible Microwave Electronics.
Proc. IEEE, 2015

Planar monopole antennas on substrates fabricated through an additive manufacturing process.
Proceedings of the 2015 IEEE Radio and Wireless Symposium, 2015

2.4 GHz inkjet-printed RF energy harvester on bulk cardboard substrate.
Proceedings of the 2015 IEEE Radio and Wireless Symposium, 2015

2014
Energy Harvesting and Scavenging [Scanning the Issue].
Proc. IEEE, 2014

Solar/Electromagnetic Energy Harvesting and Wireless Power Transmission.
Proc. IEEE, 2014

Ambient RF Energy-Harvesting Technologies for Self-Sustainable Standalone Wireless Sensor Platforms.
Proc. IEEE, 2014

Optimized design of multiband and solar rectennas.
Proceedings of the IEEE Topical Conference on Wireless Sensors and Sensor Networks, 2014

A fully inkjet-printed chipless RFID gas and temperature sensor on paper.
Proceedings of the IEEE RFID Technology and Applications Conference, 2014

Inkjet-printed GSM900 band RF power harvester on paper-based substrates.
Proceedings of the IEEE RFID Technology and Applications Conference, 2014

RF tag front-end design for uncompromised communication and harvesting.
Proceedings of the IEEE RFID Technology and Applications Conference, 2014

Effect of feeder cable's phase tolerance on the first sidelobe level of base station antenna.
Proceedings of the International Wireless Communications and Mobile Computing Conference, 2014

2013
Automated Identification of Plywood Using Embedded Inkjet-Printed Passive UHF RFID Tags.
IEEE Trans Autom. Sci. Eng., 2013

Wireless sensing and identification based on radar cross section variability measurement of passive electromagnetic sensors.
Ann. des Télécommunications, 2013

An IPv6-enabled wireless shoe-mounted platform for health-monitoring.
Proceedings of the IEEE Topical Conference on Wireless Sensors and Sensor Networks, 2013

Virtualizing power cords by wireless power transmission and energy harvesting.
Proceedings of the 2013 IEEE Radio and Wireless Symposium, 2013

Chip-to-package wireless power transfer and its application to mm-Wave antennas and monolithic radiometric receivers.
Proceedings of the 2013 IEEE Radio and Wireless Symposium, 2013

Power harvesting from microwave oven electromagnetic leakage.
Proceedings of the 2013 ACM International Joint Conference on Pervasive and Ubiquitous Computing, 2013

2012
Short-term power load forecasting using grey correlation contest modeling.
Expert Syst. Appl., 2012

A 927 MHz solar powered active antenna oscillator beacon signal generator.
Proceedings of the IEEE Topical Conference on Wireless Sensors and Sensor Networks, 2012

Embedding inkjet-printed antennas into plywood structures for identification and sensing.
Proceedings of the 2012 IEEE International Conference on RFID-Technologies and Applications, 2012

Wireless sensing and identification of passive electromagnetic sensors based on millimetre-wave FMCW RADAR.
Proceedings of the 2012 IEEE International Conference on RFID-Technologies and Applications, 2012

Inkjet-printed monopole antennas for enhanced-range WBAN and wearable biomonitoring application.
Proceedings of the 2nd ACM international workshop on Pervasive Wireless Healthcare, 2012

Multipacket reception MAC schemes for the RFID EPC Gen2 protocol.
Proceedings of the 2012 International Symposium on Wireless Communication Systems (ISWCS), 2012

SenSprout: inkjet-printed soil moisture and leaf wetness sensor.
Proceedings of the 2012 ACM Conference on Ubiquitous Computing, 2012

2011
A New Power-Consumption Optimization Technique for Two-Stage Operational Amplifiers.
IEICE Trans. Electron., 2011

A 0.5-6 MHz Active-RC LPF with Fine Gain Steps Using Binary Interpolated Resistor Banks.
IEICE Trans. Electron., 2011

Review of technologies for low-cost integrated sensors.
Proceedings of the 2011 IEEE International Conference on RFID-Technologies and Applications, 2011

2010
Progress Towards the First Wireless Sensor Networks Consisting of Inkjet-Printed, Paper-Based RFID-Enabled Sensor Tags.
Proc. IEEE, 2010

Enabling Localization in WSNs with Solar-Powered End Devices.
Proceedings of the IEEE International Conference on Sensor Networks, 2010

2009
Design and Development of Radio Frequency Identification (RFID) and RFID-Enabled Sensors on Flexible Low Cost Substrates
Synthesis Lectures on RF/Microwaves, Morgan & Claypool Publishers, ISBN: 978-3-031-02524-2, 2009

Robust passive beamformer using bridge function sequences as weights.
IEICE Electron. Express, 2009

Inkjet-Printed Paper-Based RFID and Nanotechnology-Based Ultrasensitive Sensors: The "Green" Ultimate Solution for an Ever Improving Life Quality and Safety?
Proceedings of the Next Generation Society. Technological and Legal Issues, 2009

2008
Novel Energy Harvesting Technologies for ICT Applications.
Proceedings of the 2008 International Symposium on Applications and the Internet, 2008

Conductive Inkjet-Printed Wireless Sensor Nodes on Flexible Low-Cost Paper-Based Substrates.
Proceedings of the Next Generation Teletraffic and Wired/Wireless Advanced Networking, 2008

2007
Three-Dimensional Integration and Modeling: A Revolution in RF and Wireless Packaging
Synthesis Lectures on Computational Electromagnetics, Morgan & Claypool Publishers, ISBN: 978-3-031-01703-2, 2007

Development of Multi-Broadband Planar Wire Antennas for Wireless Applications.
Wirel. Pers. Commun., 2007

Antenna Advancement Techniques and Integration of RFID Electronics on Organic Substrates for UHF RFID Applications in Automotive Sensing and Vehicle Security.
Proceedings of the 66th IEEE Vehicular Technology Conference, 2007

Inkjet-Printed RFID Tags on Paper-based Substrates for UHF "Cognitive Intelligence" Applications.
Proceedings of the IEEE 18th International Symposium on Personal, 2007

Study of a Conformal UWB Elliptical Monopole Antenna on Flexible Organic Substrate Mounted on Cylindrical Surfaces.
Proceedings of the IEEE 18th International Symposium on Personal, 2007

Light Weight MIMO Phased Arrays with Beam Steering Capabilities using RF MEMS.
Proceedings of the IEEE 18th International Symposium on Personal, 2007

2006
MRTD (Multi Resolution Time Domain) Method in Electromagnetics
Synthesis Lectures on Computational Electromagnetics, Morgan & Claypool Publishers, ISBN: 978-3-031-01687-5, 2006

2001
Beowulf Cluster Design for Scientific PDE Models.
Proceedings of the 5th Annual Linux Showcase & Conference 2001, 2001


  Loading...