Mauro D'Arco

Orcid: 0000-0003-1641-8359

According to our database1, Mauro D'Arco authored at least 51 papers between 2001 and 2024.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2024
Detection and Tracking of Moving Objects Using a Roadside LiDAR System.
IEEE Instrum. Meas. Mag., February, 2024

2023
Exploring the Relationship Between Performance and Environmental Sustainability in Measurement Systems: A Preliminary Study.
Proceedings of the IEEE International Conference on Metrology for eXtended Reality, 2023

2022
General Approach to the Calibration of Innovative MFP Multichannel Digitizers.
IEEE Trans. Instrum. Meas., 2022

Enabling Fine Sample Rate Settings in DSOs with Time-Interleaved ADCs.
Sensors, 2022

The Environmental Sustainability of Measurements: A Practical Case-study With The Wheatstone bridge.
Proceedings of the 7th IEEE Forum on Research and Technologies for Society and Industry Innovation, 2022

2021
Real-Time Downsampling in Digital Storage Oscilloscopes With Multichannel Architectures.
IEEE Trans. Circuits Syst. I Regul. Pap., 2021

A Review of Streamline Calibration Approaches for Digital Storage Oscilloscopes with Time-Interleaved Channels.
IEEE Instrum. Meas. Mag., 2021

Using Data Acquisition Systems for Time Period Measurements Based on Averaging Approaches.
Proceedings of the 6th IEEE International Forum on Research and Technology for Society and Industry, 2021

2020
A Time Base Option for Arbitrary Selection of Sample Rate in Digital Storage Oscilloscopes.
IEEE Trans. Instrum. Meas., 2020

A Night at the OPERA: A Conceptual Framework for an Integrated Distributed Sensor Network-Based System to Figure out Safety Protocols for Animals under Risk of Fire.
Sensors, 2020

Digital Circuit for Seamless Resampling ADC Output Streams.
Sensors, 2020

High-speed AWG exploiting parallel time interleaved DAC cores.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

2019
Remote laboratory design and implementation as a measurement and automation experiential learning opportunity.
IEEE Instrum. Meas. Mag., 2019

Internet-oriented measurement and automation project for Industry 4.0 educational program.
Proceedings of the 5th IEEE International Symposium on Measurements & Networking, 2019

Digital Circuit for the Arbitrary Selection of Sample Rate in Digital Storage Oscilloscopes.
Proceedings of the Applications in Electronics Pervading Industry, Environment and Society, 2019

2018
Evaluating the Uncertainty of Digitizing Waveform Recorders Coherently With the GUM.
IEEE Trans. Instrum. Meas., 2018

LoRa Signals Classification Through a CS-Based Method.
Proceedings of the 4th IEEE International Forum on Research and Technology for Society and Industry, 2018

IOT Enabling Measurement Applications in Industry 4.0: Platform for Remote Programming ATES.
Proceedings of the 2018 Workshop on Metrology for Industry 4.0 and IoT, 2018

2017
Parameters and Methods for ADCs Testing Compliant With the Guide to the Expression of Uncertainty in Measurements.
IEEE Trans. Instrum. Meas., 2017

Multi-rate signal processing based model for high-speed digitizers.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

Evaluating the uncertainty of dynamic signals sampled by ADCs.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

2016
A Novel Method for Phase Noise Measurement Based on Cyclic Complementary Autocorrelation.
IEEE Trans. Instrum. Meas., 2016

A proposal for DSO bandwidth extension through synchronous time interleaving.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2016

2015
Innovating the industrial measurement and control network of an oil refinery.
Proceedings of the 1st IEEE International Forum on Research and Technologies for Society and Industry Leveraging a better tomorrow, 2015

Autonomous recharge of drones through an induction based power transfer system.
Proceedings of the IEEE International Workshop on Measurements & Networking, 2015

An experimental energy set-up for wireless battery recharging.
Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

2014
Design and Implementation of a Preprocessing Circuit for Bandpass Signals Acquisition.
IEEE Trans. Instrum. Meas., 2014

FPGA based system for the generation of noise with programmable power spectrum.
Proceedings of the IEEE International Symposium on Circuits and Systemss, 2014

2013
Enabling induction and wireless power transmission technologies aimed at supplying remote equipment in critical logistic scenarios.
Proceedings of the 2nd IEEE International Workshop on Measurements & Networking, 2013

Measuring power systems load conditions through data segmentation.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

Measuring transmission lines parameters in the frequency domain.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

On the suitability of compressive sampling for the measurement of electrical power quality.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

2012
ANOVA-Based Approach for DAC Diagnostics.
IEEE Trans. Instrum. Meas., 2012

An Efficient Pre-Processing Scheme to Enhance Resolution in Band-Pass Signals Acquisition.
IEEE Trans. Instrum. Meas., 2012

2011
Experimental evaluation of the effects of in-channel interference on GPS receivers.
Proceedings of the IEEE International Workshop on Measurement and Networking, 2011

Web-based networking protocol for expanding IEEE-488 ATE capabilities.
Proceedings of the IEEE International Workshop on Measurement and Networking, 2011

2010
Modeling DAC Output Waveforms.
IEEE Trans. Instrum. Meas., 2010

Test Equipment for DAC's Performance Assessment: Design and Characterization.
IEEE Trans. Instrum. Meas., 2010

2009
Modeling Timing Jitter Effects in Digital-to-Analog Converters.
IEEE Trans. Instrum. Meas., 2009

2008
A Time-Domain Approach for the Analysis of Nonstationary Signals in Power Systems.
IEEE Trans. Instrum. Meas., 2008

A Digital Signal Processing Instrument for Real-Time Phase Noise Measurement.
IEEE Trans. Instrum. Meas., 2008

2007
Modulation Tests on Bluetooth Transmitters Through Time-Frequency Representations.
IEEE Trans. Instrum. Meas., 2007

Clustering-Based Method for Detecting and Evaluating I/Q Impairments in Radio-Frequency Digital Transmitters.
IEEE Trans. Instrum. Meas., 2007

2006
Fast Transformation for DAC Parameters Identification.
IEEE Trans. Instrum. Meas., 2006

2005
Error vector-based measurement method for radiofrequency digital transmitter troubleshooting.
IEEE Trans. Instrum. Meas., 2005

On the use of the warblet transform for instantaneous frequency estimation.
IEEE Trans. Instrum. Meas., 2005

2004
New digital signal-Processing approach for transmitter measurements in third generation Telecommunications systems.
IEEE Trans. Instrum. Meas., 2004

Evaluating phase noise power spectrum with variable frequency resolution.
IEEE Trans. Instrum. Meas., 2004

2003
A new method for power measurements in digital wireless communication systems.
IEEE Trans. Instrum. Meas., 2003

2002
A measurement method based on a modified version of the chirplet transform for instantaneous frequency estimation.
IEEE Trans. Instrum. Meas., 2002

2001
A digital signal-processing approach for phase noise measurement.
IEEE Trans. Instrum. Meas., 2001


  Loading...