Emmanuel Godoy

Orcid: 0000-0001-9114-8729

According to our database1, Emmanuel Godoy authored at least 41 papers between 1999 and 2021.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2021
Control for autonomous vehicles in high dynamics maneuvers: LPV modeling and static feedback controller.
Proceedings of the IEEE Conference on Control Technology and Applications, 2021

Input Currents DCM Modelling of a Vienna-based Rectifier.
Proceedings of the IEEE Conference on Control Technology and Applications, 2021

2020
Wide Operating Range Current Loop Stability Analysis of a VIENNA-type Three-Phase Rectifier for a Medical Imaging System Power Supply.
Proceedings of the Informatics in Control, Automation and Robotics, 2020

Current Loop Stability Analysis of a VIENNA-type Three-phase Rectifier for an Imaging System Power Supply Application.
Proceedings of the 17th International Conference on Informatics in Control, 2020

Functional Model-Based Arbitration Strategies Between System Missions: An Application to the Electric Vehicle.
Proceedings of the Informatics in Control, Automation and Robotics, 2020

Functional Model-based Resource Management: An Application to the Electric Vehicle Thermal Control.
Proceedings of the 17th International Conference on Informatics in Control, 2020

2019
Charge analysis for Li-ion battery pack state of health estimation for electric and hybrid vehicles.
Proceedings of the IECON 2019, 2019

2018
Li-Ion Battery Pack SoC Estimation for Electric Vehicles.
Proceedings of the IECON 2018, 2018

Study of the Physiological Parameters of a Regulated Oxygen Mask.
Proceedings of the Informatics in Control, Automation and Robotics, 2018

Stability Analysis of a Regulated Oxygen Mask.
Proceedings of the 15th International Conference on Informatics in Control, 2018

Nonlinear Control of an Industrial Charger.
Proceedings of the IEEE Conference on Control Technology and Applications, 2018

2017
Energy-Based Functional Modelling for Control Architecture Design: An Application to Energy Management for a Hybrid Electric Vehicle.
Proceedings of the Informatics in Control, Automation and Robotics, 2017

Control Architecture Modeling using Functional Energetic Method - Demonstration on a Hybrid Electric Vehicle.
Proceedings of the 14th International Conference on Informatics in Control, 2017

Harmonic state space feedback control for AC/DC power converters.
Proceedings of the 2017 American Control Conference, 2017

2015
Optimization-based energy management strategies for electric vehicles.
Proceedings of the IECON 2015, 2015

Decentralized Control: Application to a Turboprop Engine.
Proceedings of the Informatics in Control, 2015

Coupling Analysis and Control of a Turboprop Engine.
Proceedings of the ICINCO 2015, 2015

2014
Stabilization of a DC electrical network via backstepping approach.
Proceedings of the 23rd IEEE International Symposium on Industrial Electronics, 2014

Frequential identification of a Proton Exchange Membrane Fuel Cell (PEMFC) fractional order model.
Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014

Multi-loop Control Using Gershgorin and Ostrowski Bands.
Proceedings of the ICINCO 2014 - Proceedings of the 11th International Conference on Informatics in Control, Automation and Robotics, Volume 1, Vienna, Austria, 1, 2014

2013
PI Stabilization of Power Converters With Partial State Measurements.
IEEE Trans. Control. Syst. Technol., 2013

Active reduction of vibrations in synchronous motors.
Proceedings of the IECON 2013, 2013

Active reduction of vibrations in synchronous motors by use of an estimator.
Proceedings of the IEEE International Conference on Control Applications, 2013

Energetic optimization of automotive thermal systems using mixed-integer programming and model predictive control.
Proceedings of the IEEE International Conference on Control Applications, 2013

2012
FPGA based predictive deadbeat control for high switching frequency SEPIC.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

Identification of Polytopic Models for a Linear Parameter-varying System Performed on a Vehicle.
Proceedings of the ICINCO 2012 - Proceedings of the 9th International Conference on Informatics in Control, Automation and Robotics, Volume 1, Rome, Italy, 28, 2012

Observer-based PI stabilization of power converters.
Proceedings of the American Control Conference, 2012

2011
Robustified Control of a Multivariable Robot.
Proceedings of the ICINCO 2011 - Proceedings of the 8th International Conference on Informatics in Control, Automation and Robotics, Volume 1, Noordwijkerhout, The Netherlands, 28, 2011

2010
Robust adaptive control of the mold level in the continuous casting process using multiple models.
Proceedings of the American Control Conference, 2010

2009
Periodic Disturbances Reduction in the Continuous Casting Process by Means of a Modified Smith Predictor.
Proceedings of the ICINCO 2009, Proceedings of the 6th International Conference on Informatics in Control, Automation and Robotics, 2009

Robust non-linear controllers for automotive vehicle handling.
Proceedings of the 10th European Control Conference, 2009

Control of a flexible arm by means of robustified MPC.
Proceedings of the 10th European Control Conference, 2009

Vibration reduction using a two-step braking profile.
Proceedings of the American Control Conference, 2009

Robust non-linear control applied to internal combustion engine air path using Particle Swarm Optimization.
Proceedings of the IEEE International Conference on Control Applications, 2009

2008
Disturbances Estimation for Mold Level Control in the Continuous Casting Process.
Proceedings of the ICINCO 2008, 2008

Suppression of periodic disturbances in the continuous casting process.
Proceedings of the IEEE International Conference on Control Applications, 2008

2007
Irreversibility modeling applied to the control of complex robotic drive chains.
Proceedings of the ICINCO 2007, 2007

2005
RST-Controller Design for Sinewave References by Means of an Auxiliary Diophantine Equation.
Proceedings of the 44th IEEE IEEE Conference on Decision and Control and 8th European Control Conference Control, 2005

2001
Automatic QFT controller design comparison with state space feedback.
Proceedings of the 6th European Control Conference, 2001

2000
QFT controller optimization for automatic design.
Proceedings of the 39th IEEE Conference on Decision and Control, 2000

1999
Control design methodology for periodic systems with variable sampling period application to resonant converters.
Proceedings of the 5th European Control Conference, 1999


  Loading...