Leandro Lorenzelli

Orcid: 0000-0003-4624-170X

According to our database1, Leandro Lorenzelli authored at least 37 papers between 2001 and 2024.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2024
Enhancing the Deposition Rate and Uniformity in 3D Gold Microelectrode Arrays via Ultrasonic-Enhanced Template-Assisted Electrodeposition.
Sensors, February, 2024

2023
Addressing Non-Idealities and EIS Measurement: From Inspection to Implementation.
IEEE Instrum. Meas. Mag., December, 2023

Tailoring the Performance of a Nafion 117 Humidity Chipless RFID Sensor: The Choice of the Substrate.
Sensors, February, 2023

A Fingertip-Mimicking 12×16 200μm-Resolution e-skin Taxel Readout Chip with per-Taxel Spiking Readout and Embedded Receptive Field Processing.
Proceedings of the 2023 IEEE Symposium on VLSI Technology and Circuits (VLSI Technology and Circuits), 2023

2022
Supplementary Material: Design of experiment rational optimization of an inkjet deposition of silver on Kapton.
Dataset, May, 2022

Nafion-Based Chipless RFID Humidity Sensor for Smart Tag Applications.
Proceedings of the Sensors and Microsystems, 2022

2021
A low-power 6-bit successive approximation register ADC using a new split capacitor array method.
Proceedings of the IEEE Asia Pacific Conference on Circuit and Systems, 2021

2020
A Preliminary Microwave Frequency Characterization of a Nafion-Based Chipless Sensor for Humidity Monitoring.
Proceedings of the 2020 IEEE Sensors, Rotterdam, The Netherlands, October 25-28, 2020, 2020

2018
Microcantilever Based Dual Mode Optical Biosensor for Agricultural Pathogen Detection.
Proceedings of the 2018 IEEE SENSORS, New Delhi, India, October 28-31, 2018, 2018

Flexible AlN Coupled MOSFET Device for Touch Sensing.
Proceedings of the 2018 IEEE SENSORS, New Delhi, India, October 28-31, 2018, 2018

Surface Pressure Reconstruction for a Prosthetic Socket Design System - a Numerical Case Study.
Proceedings of the 14th IEEE International Conference on Control and Automation, 2018

2017
Socketmaster: Integrated Sensors System for the Optimised Design of Prosthetic Socket for above Knee Amputees.
Proceedings of the New Generation of CAS, 2017

Dual mode pressure sensing for prosthetic interfaces.
Proceedings of the 7th IEEE International Workshop on Advances in Sensors and Interfaces, 2017

Hybrid structure of stretchable interconnect for reliable E-skin application.
Proceedings of the 26th IEEE International Symposium on Industrial Electronics, 2017

Graphene gold nanoparticle hybrid based near infrared photodetector.
Proceedings of the 2017 IEEE SENSORS, Glasgow, United Kingdom, October 29, 2017

Multifunctional flexible PVDF-TrFE/BaTiO3 based tactile sensor for touch and temperature monitoring.
Proceedings of the 2017 IEEE SENSORS, Glasgow, United Kingdom, October 29, 2017

Stretchable pH sensing patch in a hybrid package.
Proceedings of the 2017 IEEE SENSORS, Glasgow, United Kingdom, October 29, 2017

2016
Device Modelling for Bendable Piezoelectric FET-Based Touch Sensing System.
IEEE Trans. Circuits Syst. I Regul. Pap., 2016

Microfluidic Sample Preparation Methods for the Analysis of Milk Contaminants.
J. Sensors, 2016

PDMS Template Generator for Wearable Thermoelectric Energy Harvesting Applications.
Proceedings of the Sensors, 2016

Energy neutral 32-channels embedded readout system for IoT-ready fitness equipments.
Proceedings of the IEEE Sensors Applications Symposium, 2016

Towards bendable piezoelectric oxide semiconductor field effect transistor based touch sensor.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2016

Portable embedded systems for prosthetic interface stress mapping of lower limbs amputees.
Proceedings of the 2016 IEEE SENSORS, Orlando, FL, USA, October 30 - November 3, 2016, 2016

Remote rehabilitation monitoring with an IoT-enabled embedded system for precise progress tracking.
Proceedings of the 2016 IEEE International Conference on Electronics, Circuits and Systems, 2016

Embedded System for Prosthetic Interface Mapping of Lower Limbs Amputees.
Proceedings of the Applications in Electronics Pervading Industry, Environment and Society, 2016

2015
New materials and advances in making electronic skin for interactive robots.
Adv. Robotics, 2015

2014
Flexible thermoelectric generator based on transfer printed Si microwires.
Proceedings of the 44th European Solid State Device Research Conference, 2014

2013
State of the art and perspectives on the fabrication of functional contact lenses.
Proceedings of the 2013 ACM International Joint Conference on Pervasive and Ubiquitous Computing, 2013

2012
Long-Term Outdoor Reliability Assessment of a Wireless Unit for Air-Quality Monitoring Based on Nanostructured Films Integrated on Micromachined Platforms.
Sensors, 2012

2011
Experimental study and analysis of corner compensation structures for CMOS compatible bulk micromachining using 25 wt% TMAH.
Microelectron. J., 2011

A Micro Polymerase Chain Reaction Module for Integrated and Portable DNA Analysis Systems.
J. Sensors, 2011

An analog readout circuit with offset calibration for cantiliver-based DNA detection.
Proceedings of the 37th European Solid-State Circuits Conference, 2011

2010
POSFET devices based tactile sensing arrays.
Proceedings of the International Symposium on Circuits and Systems (ISCAS 2010), May 30, 2010

2007
POSFET Based Tactile Sensor Arrays.
Proceedings of the 14th IEEE International Conference on Electronics, 2007

2006
A CMOS Interface for a Gas-Sensor Array with a 0.5%-Linearity over 500kΧ-to-1GΧ Range and 2.5°C Temperature Control Accuracy.
Proceedings of the 2006 IEEE International Solid State Circuits Conference, 2006

2005
A complete front-end system read-out and temperature control for resistive gas sensor array.
Proceedings of the 2005 European Conference on Circuit Theory and Design, 2005

2001
A CMOS ASIC for differential read-out of ISFET sensors.
Proceedings of the 2001 8th IEEE International Conference on Electronics, 2001


  Loading...