Xiaonan Yang
This page is a disambiguation page, it actually contains multiple papers from persons of the same or a similar name.
Bibliography
2026
CoRR, April, 2026
From Frequency to Temporal: Three Simple Steps Achieve Lightweight High-Performance Motor Imagery Decoding.
IEEE Trans. Biomed. Eng., January, 2026
Resilience analysis of four-state engineering systems under the framework of continuous-time Markov chain model.
Reliab. Eng. Syst. Saf., 2026
Human-large language model collaboration in clinical medicine: a systematic review and meta-analysis.
npj Digit. Medicine, 2026
IEEE Internet Things J., 2026
High-precision quality-graded recycling optimization in reverse supply chains: A case from an electronics manufacturer.
Expert Syst. Appl., 2026
Two stages framework based on foundation model and Kolmogorov Cross-Domain Decoupled Network for spinal disease analysis.
Biomed. Signal Process. Control., 2026
Appl. Soft Comput., 2026
2025
Sensorless Coordination Control Scheme for Distributed Dual CLF-PM Wheel-Side Motors Drive Electric Vehicles.
IEEE Trans. Ind. Electron., November, 2025
Diffusion Modeling With Domain-Conditioned Prior Guidance for Accelerated MRI and qMRI Reconstruction.
IEEE Trans. Medical Imaging, September, 2025
Mobile recognition system for multinational currencies based on CA-DSC-RepVGG algorithm.
J. Supercomput., 2025
Inf. Process. Manag., 2025
An adaptive relay selection strategy for user cooperation networks based on social-aware.
ICT Express, 2025
A transfer reinforcement learning and digital-twin based task allocation method for human-robot collaboration assembly.
Eng. Appl. Artif. Intell., 2025
Effects of interface design and spatial ability on teleoperation cognitive load and task performance.
Displays, 2025
Comput. Medical Imaging Graph., 2025
Dynamic mutual training semi-supervised semantic segmentation algorithm with adaptive capability (AD-DMT) for choy sum stem segmentation and 3D positioning of cutting points.
Comput. Electron. Agric., 2025
A reinforcement learning from human feedback based method for task allocation of human robot collaboration assembly considering human preference.
Adv. Eng. Informatics, 2025
Proceedings of the 14th International Joint Conference on Natural Language Processing and the 4th Conference of the Asia-Pacific Chapter of the Association for Computational Linguistics, 2025
Practical Research on the Application of the CDIO Model Optimized by AIGC Toolchain in the Integrated Training of Software Technology.
Proceedings of the 2025 4th International Conference on Artificial Intelligence and Education, 2025
Towards a CDIO Teaching Model for Software Testing Courses under the Bidirectional Empowerment of Artificial Intelligence.
Proceedings of the 2025 4th International Conference on Artificial Intelligence and Education, 2025
A Method of Assembly Guidance Information Delivery in Augmented Reality Considering Users' Proficiency Levels.
Proceedings of the HCI in Business, Government and Organizations, 2025
Rapid Robotic Arm Path Planning Through Deep Reinforcement Learning with Human Demonstration Key Points.
Proceedings of the HCI International 2025 - Late Breaking Papers, 2025
Effect of Collaborative Robotic Arm Motion Speed and Human-Robot Distance on Perceived Safety.
Proceedings of the Human-Computer Interaction, 2025
Assessing Situation Awareness in Different Space Teleoperation Tasks Using Eye-Tracking.
Proceedings of the Virtual, Augmented and Mixed Reality, 2025
SDISC: A Spike-Driven Human-Machine Interface with In-Situ Computing for Real-Time Low-Power Interaction.
Proceedings of the 62nd ACM/IEEE Design Automation Conference, 2025
2024
ARE-Platform: An Augmented Reality-Based Ergonomic Evaluation Solution for Smart Manufacturing.
Int. J. Hum. Comput. Interact., June, 2024
Spatial Visual Imagery (SVI)-Based Electroencephalograph Discrimination for Natural CAD Manipulation.
Sensors, February, 2024
Temperature Self-Compensated Biosensor Based on No-Core-Fiber Offset Microcavity for Label-Free BSA Detection.
IEEE Trans. Instrum. Meas., 2024
Sensitivity-Enhanced RI Sensor Based on Cascaded Microfiber Mach-Zehnder Interferometers Near the Dispersion Turning Point With Vernier Effect.
IEEE Trans. Instrum. Meas., 2024
Interaction Between Dynamic Affection and Arithmetic Cognitive Ability: A Practical Investigation With EEG Measurement.
IEEE Trans. Affect. Comput., 2024
3D guiding assisted augmented assembly technology with rapid object detection in dynamic environment.
Adv. Eng. Informatics, 2024
Proceedings of the Human-Computer Interaction, 2024
Proceedings of the Human-Computer Interaction, 2024
A Path Planning Method Based on Deep Reinforcement Learning with Improved Prioritized Experience Replay for Human-Robot Collaboration.
Proceedings of the Human-Computer Interaction, 2024
2023
A Physical Fatigue Evaluation Method for Automotive Manual Assembly: An Experiment of Cerebral Oxygenation with ARE Platform.
Sensors, December, 2023
Efficient and persistent backdoor attack by boundary trigger set constructing against federated learning.
Inf. Sci., December, 2023
The decision-making framework for assembly tasks planning in human-robot collaborated manufacturing system.
Int. J. Comput. Integr. Manuf., February, 2023
Assessing the Cognitive Load Arising from In-Vehicle Infotainment Systems Using Pupil Diameter.
Proceedings of the Cross-Cultural Design, 2023
Robot Path Verification Method for Automotive Glue-Coating Based on Augmented Reality and Digital Twin.
Proceedings of the Human-Computer Interaction, 2023
2022
Pupil and Electromyography (EMG) Responses to Collision Warning in a Real Driving Environment.
Proceedings of the Human-Computer Interaction. Technological Innovation, 2022
Multi-person Collaborative Augmented Reality Assembly Process Evaluation System Based on HoloLens.
Proceedings of the Virtual, Augmented and Mixed Reality: Applications in Education, Aviation and Industry, 2022
A Multi-person Collaborative Workshop RULA Verification Method Based on Augmented Reality.
Proceedings of the HCI International 2022 Posters, 2022
Augmented Reality-Based Rapid Digital Verification of the Body-in-white for Intelligent Manufacturing.
Proceedings of the 6th International Conference on Computer Science and Application Engineering, 2022
AR-based Accessibility Verification Method for Smart Manufacturing System with Human Motion Capture.
Proceedings of the 6th International Conference on Computer Science and Application Engineering, 2022
2021
Strain- and Temperature-Sensing Characteristics of Fiber Ring Laser Sensor With Cascaded Fabry-Perot Interferometer and FBG.
IEEE Trans. Instrum. Meas., 2021
2020
A Hybrid Character Recognition Approach Using Fuzzy Logic and Stroke Bayesian Program Learning With Naïve Bayes in Industrial Environments.
IEEE Access, 2020
2019
Measuring Workload in a Multitasking Environment Using Fractal Dimension of Pupil Dilation.
Int. J. Hum. Comput. Interact., 2019
IEEE Access, 2019
Pupillary Response and EMG Predict Upcoming Responses to Collision Avoidance Warning.
Proceedings of the Advances in Human Factors and Simulation, 2019
2018
LoID-EEC: Localizing and Identifying Early Esophageal Cancer Based on Deep Learning in Screening Chromoendoscopy.
Proceedings of the 2nd International Conference on Video and Image Processing, 2018
Proceedings of the Design, User Experience, and Usability: Users, Contexts and Case Studies, 2018
2016
Arbitrarily Accessible 3D Microfluidic Device for Combinatorial High-Throughput Drug Screening.
Sensors, 2016
Maintenance and bandwidth scheduling for cloud rendering in optical data center networks.
Proceedings of the 2016 IEEE/CIC International Conference on Communications in China, 2016
Proceedings of the Engineering Psychology and Cognitive Ergonomics, 2016
2015
Proceedings of the 2015 IEEE Innovative Smart Grid Technologies, 2015
Impact of P/E cycling on read current fluctuation of NOR Flash memory cell: A microscopic perspective based on low frequency noise analysis.
Proceedings of the IEEE International Reliability Physics Symposium, 2015