Federico Baronti

According to our database1, Federico Baronti authored at least 47 papers between 2003 and 2019.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Other 

Links

Homepages:

On csauthors.net:

Bibliography

2019
Implementation and Test of a 48 V Smart Battery System with Integrated DC/DC Converter.
Proceedings of the 28th IEEE International Symposium on Industrial Electronics, 2019

2018
Modeling, Control, and Integration of Energy Storage Systems in E-Transportation and Smart Grid.
IEEE Trans. Industrial Electronics, 2018

Hardware-in-the-Loop Platform for Assessing Battery State Estimators in Electric Vehicles.
IEEE Access, 2018

Advances in Li-Ion Battery Management for Electric Vehicles.
Proceedings of the IECON 2018, 2018

Doubly-Balanced Gilbert Cell Down-Conversion Mixer in AMS 0.35 µm SiGe CMOS for Mode-1 MB-OFDM UWB Receivers.
Proceedings of the Applications in Electronics Pervading Industry, Environment and Society, 2018

2017
Simulation platform for analyzing battery parallelization.
Proceedings of the 14th International Conference on Synthesis, 2017

Tuning of Moving Window Least Squares-based algorithm for online battery parameter estimation.
Proceedings of the 14th International Conference on Synthesis, 2017

An FPGA-based controller for collaborative robotics.
Proceedings of the 26th IEEE International Symposium on Industrial Electronics, 2017


2016
E-transportation: the role of embedded systems in electric energy transfer from grid to vehicle.
EURASIP J. Emb. Sys., 2016

Hardware-in-the-loop simulation of FPGA-based state estimators for electric vehicle batteries.
Proceedings of the 25th IEEE International Symposium on Industrial Electronics, 2016

System on chip battery state estimator: E-bike case study.
Proceedings of the IECON 2016, 2016

2015
Implementation of the fast charging concept for electric local public transport: The case-study of a minibus.
Proceedings of the 13th IEEE International Conference on Industrial Informatics, 2015

Comparison of state and parameter estimators for electric vehicle batteries.
Proceedings of the IECON 2015, 2015

Open-circuit voltage measurement of Lithium-Iron-Phosphate batteries.
Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

2014
Guest Editorial: Special Section on Information and Control Technologies in the Electrification of Transportation.
IEEE Trans. Industrial Informatics, 2014

Design and Safety Verification of a Distributed Charge Equalizer for Modular Li-Ion Batteries.
IEEE Trans. Industrial Informatics, 2014

Online Adaptive Parameter Identification and State-of-Charge Coestimation for Lithium-Polymer Battery Cells.
IEEE Trans. Industrial Electronics, 2014

Experimental validation of an efficient charge equalization system for Lithium-ion batteries.
Proceedings of the 23rd IEEE International Symposium on Industrial Electronics, 2014

Design of the traction battery for a Formula SAE racing car.
Proceedings of the 23rd IEEE International Symposium on Industrial Electronics, 2014

FPGA implementation of the mix algorithm for state-of-charge estimation of Lithium-ion batteries.
Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014

Squeeze the Lemon: Balancing as a Way to Use Every Drop of Energy in a Lithium-Ion Battery.
Proceedings of the Applications in Electronics Pervading Industry, Environment and Society, 2014

2013
High-Efficiency Digitally Controlled Charge Equalizer for Series-Connected Cells Based on Switching Converter and Super-Capacitor.
IEEE Trans. Industrial Informatics, 2013


Experimental analysis of open-circuit voltage hysteresis in lithium-iron-phosphate batteries.
Proceedings of the IECON 2013, 2013

Mitigation of Single Event Upsets in the control logic of a charge equalizer for Li-ion batteries.
Proceedings of the IECON 2013, 2013

Integrated Front-end Electronics for Silicon PhotoMultiplier Readout in Medical Imaging Applications.
Proceedings of the Applications in Electronics Pervading Industry, Environment and Society, 2013

2012
Wireless Sensor Node for Surface Seawater Density Measurements.
Sensors, 2012

Modeling and online parameter identification of Li-Polymer battery cells for SOC estimation.
Proceedings of the 21st IEEE International Symposium on Industrial Electronics, 2012

Design of a module switch for battery pack reconfiguration in high-power applications.
Proceedings of the 21st IEEE International Symposium on Industrial Electronics, 2012

Batteries and battery management systems for electric vehicles.
Proceedings of the 2012 Design, Automation & Test in Europe Conference & Exhibition, 2012

2011
A New and Accurate System for Measuring Cruising Yacht Freeboards With Magnetostrictive Sensors.
IEEE Trans. Instrumentation and Measurement, 2011

Design and Verification of Hardware Building Blocks for High-Speed and Fault-Tolerant In-Vehicle Networks.
IEEE Trans. Industrial Electronics, 2011

2010
Firmware/software platform for rapid development of PC-based data acquisition systems.
Proceedings of the 17th IEEE International Conference on Electronics, 2010

Effective modeling of temperature effects on lithium polymer cells.
Proceedings of the 17th IEEE International Conference on Electronics, 2010

2009
FPGA/DSP-based implementation of a high-performance multi-channel counter.
Journal of Systems Architecture - Embedded Systems Design, 2009

Distributed sensor for steering wheel rip force measurement in driver fatigue detection.
Proceedings of the Design, Automation and Test in Europe, 2009

2008
Electronic Control of a Motorcycle Suspension for Preload Self-Adjustment.
IEEE Trans. Industrial Electronics, 2008

An electronic barrier system to improve blood transfusion safety.
Proceedings of the 15th IEEE International Conference on Electronics, Circuits and Systems, 2008

2007
The importance of At-Speed Scan Testing: an industrial experience.
Proceedings of the Tenth Euromicro Conference on Digital System Design: Architectures, 2007

A Hardware-Software Platform for Design and Verification of In-Motorcycle Electronic Systems.
Proceedings of the Tenth Euromicro Conference on Digital System Design: Architectures, 2007

FPGA/DSP-based Configurable Multi-Channel Counter.
Proceedings of the Tenth Euromicro Conference on Digital System Design: Architectures, 2007

2006
Wireless Audio Communication Network for In-Vehicle Access of Infotainment Services in Motorcycles.
Proceedings of the IEEE 17th International Symposium on Personal, 2006

FlexRay transceiver in a 0.35 µm CMOS high-voltage technology.
Proceedings of the Conference on Design, Automation and Test in Europe: Designers' Forum, 2006

2005
60-channel high-resolution counter array for high-speed continuous long-term data acquisition.
Proceedings of the 12th IEEE International Conference on Electronics, 2005

Self-adjusting multiple-period locked delay line For high-resolution multiphase clock generation.
Proceedings of the 12th IEEE International Conference on Electronics, 2005

2003
A technique for nonlinearity self-calibration of DLLs.
IEEE Trans. Instrumentation and Measurement, 2003


  Loading...