George Q. Huang

According to our database1, George Q. Huang
  • authored at least 117 papers between 1998 and 2018.
  • has a "Dijkstra number"2 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Other 

Links

Homepage:

On csauthors.net:

Bibliography

2018
Data-Driven Resilient Fleet Management for Cloud Asset-enabled Urban Flood Control.
IEEE Trans. Intelligent Transportation Systems, 2018

Special issue on smart energy efficient manufacturing.
Int. J. Computer Integrated Manufacturing, 2018

Synchronisation for smart factory - towards IoT-enabled mechanisms.
Int. J. Computer Integrated Manufacturing, 2018

Research on operation model of process cluster supply chain.
Proceedings of the 15th IEEE International Conference on Networking, Sensing and Control, 2018

The impact of industrial wearable system on industry 4.0.
Proceedings of the 15th IEEE International Conference on Networking, Sensing and Control, 2018

2017
Truthful, Budget-Balanced Bundle Double Auctions for Carrier Collaboration.
Transportation Science, 2017

A hybrid evolutionary algorithm with adaptive multi-population strategy for multi-objective optimization problems.
Soft Comput., 2017

A Cluster Based Feature Selection Method for Cross-Project Software Defect Prediction.
J. Comput. Sci. Technol., 2017

Robot-enabled execution system for perishables auction logistics.
Industrial Management and Data Systems, 2017

Location Management of Cloud Forklifts in Finished Product Warehouse.
Int. J. Intell. Syst., 2017

Cloud-based smart asset management for urban flood control.
Enterprise IS, 2017

Towards product customization and personalization in IoT-enabled cloud manufacturing.
Cluster Computing, 2017

Ubiquitous auction learning system with TELD (Teaching by Examples and Learning by Doing) approach: A quasi-experimental study.
Computers & Education, 2017

A NSGA-II based memetic algorithm for multiobjective parallel flowshop scheduling problem.
Computers & Industrial Engineering, 2017

Optimal configuration of assembly supply chains based on Hybrid augmented Lagrangian coordination in an industrial cluster.
Computers & Industrial Engineering, 2017

Data analysis for metropolitan economic and logistics development.
Advanced Engineering Informatics, 2017

On the determination of the optimal configuration of process cluster supply chain by use of augmented Lagrangian coordination.
Proceedings of the 21st IEEE International Conference on Computer Supported Cooperative Work in Design, 2017

IoT-enabled manufacturing synchronization for ecommerce.
Proceedings of the 13th IEEE Conference on Automation Science and Engineering, 2017

IoT-enabled parking space sharing.
Proceedings of the 13th IEEE Conference on Automation Science and Engineering, 2017

Physical internet-enabled E-commerce logistics park platform.
Proceedings of the 13th IEEE Conference on Automation Science and Engineering, 2017

Warehouse workload control for production logistic.
Proceedings of the 13th IEEE Conference on Automation Science and Engineering, 2017

Coordination of service clients in cloud manufacturing considering MfgSync.
Proceedings of the 13th IEEE Conference on Automation Science and Engineering, 2017

2016
Sizing, pricing and common replenishment in a headquarter-managed centralized distribution center.
Industrial Management and Data Systems, 2016

A customer satisfaction evaluation model for logistics services using fuzzy analytic hierarchy process.
Industrial Management and Data Systems, 2016

Big Data for supply chain management in the service and manufacturing sectors: Challenges, opportunities, and future perspectives.
Computers & Industrial Engineering, 2016

Schedule-based execution bottleneck identification in a job shop.
Computers & Industrial Engineering, 2016

A MPN-based scheduling model for IoT-enabled hybrid flow shop manufacturing.
Advanced Engineering Informatics, 2016

Open and collaborative product design and production in IoT-enabled manufacturing cloud.
Proceedings of the 2016 IEEE International Conference on Systems, Man, and Cybernetics, 2016

Production system multi-stage synchronization based on collaborative optimization under the Internet-of-Things environment.
Proceedings of the 13th IEEE International Conference on Networking, Sensing, and Control, 2016

2015
A Bilevel Analytical Model for Dynamic Storage Pricing in a Supply Hub in Industrial Park (SHIP).
IEEE Trans. Automation Science and Engineering, 2015

Active scheduling for hybrid flowshop with family setup time and inconsistent family formation.
J. Intelligent Manufacturing, 2015

Optimal configuration of cluster supply chains with augmented Lagrange coordination.
Computers & Industrial Engineering, 2015

Real-time scheduling for hybrid flowshop in ubiquitous manufacturing environment.
Computers & Industrial Engineering, 2015

Special Issue on "Intelligent Enterprise Systems".
Computers & Industrial Engineering, 2015

Cloud-enabled real-time platform for adaptive planning and control in auction logistics center.
Computers & Industrial Engineering, 2015

A two-level advanced production planning and scheduling model for RFID-enabled ubiquitous manufacturing.
Advanced Engineering Informatics, 2015

Cloud asset for urban flood control.
Advanced Engineering Informatics, 2015

Data-source interoperability service for heterogeneous information integration in ubiquitous enterprises.
Advanced Engineering Informatics, 2015

Cloud-Based Production Logistics Synchronization Mechanism and Method.
Proceedings of the Advances in Production Management Systems: Innovative Production Management Towards Sustainable Growth, 2015

Internet-of-Things-based just-in-time milk-run logistics routing system.
Proceedings of the 12th IEEE International Conference on Networking, Sensing and Control, 2015

Cloud Asset-enabled Prefabrication Transportation Service for public housing production in Hong Kong.
Proceedings of the IEEE International Conference on Automation Science and Engineering, 2015

2014
The TOC-Based Algorithm for Solving Multiple Constraint Resources: A Re-examination.
IEEE Trans. Engineering Management, 2014

Mining SOTs and dispatching rules from RFID-enabled real-time shopfloor production data.
J. Intelligent Manufacturing, 2014

Ontology-based dynamic alliance services (ODAS) in production service system.
Int. J. Computer Integrated Manufacturing, 2014

Multi-agent based real-time production scheduling method for radio frequency identification enabled ubiquitous shopfloor environment.
Computers & Industrial Engineering, 2014

A real-time RFID-driven model for two-level production decision-making.
Proceedings of 11th IEEE International Conference on Networking, Sensing and Control, 2014

Optimal auctions for transportation service procurement in an infinite horizon inventory system.
Proceedings of 11th IEEE International Conference on Networking, Sensing and Control, 2014

A big data cleansing approach for n-dimensional RFID-Cuboids.
Proceedings of the IEEE 18th International Conference on Computer Supported Cooperative Work in Design, 2014

An integrated cloud platform for cooperative smart asset management in urban flood control.
Proceedings of the IEEE 18th International Conference on Computer Supported Cooperative Work in Design, 2014

Inventory hedging and coordination under inventory-level-dependent demand.
Proceedings of the 2014 IEEE International Conference on Automation Science and Engineering, 2014

2013
RFID-enabled real-time advanced planning and scheduling shell for production decision making.
Int. J. Computer Integrated Manufacturing, 2013

Headquarter-centered common sourcing management through order coordination and consolidation.
Computers & OR, 2013

Supply Hub in Industrial Park (SHIP): The value of freight consolidation.
Computers & Industrial Engineering, 2013

Mining Standard Operation Times for Real-Time Advanced Production Planning and Scheduling from RFID-Enabled Shopfloor Data.
Proceedings of the 7th IFAC Conference on Manufacturing Modelling, Management, and Control, 2013

The Impact of Information and Knowledge Sharing on the Buyer-Supplier Relationship and Performance in Electronics Industry.
Proceedings of the 7th IFAC Conference on Manufacturing Modelling, Management, and Control, 2013

RFID-enabled smart assembly workshop management system.
Proceedings of 10th IEEE International Conference on Networking, Sensing and Control, 2013

Cloud service-oriented dashboard for work cell management in RFID-enabled ubiquitous manufacturing.
Proceedings of 10th IEEE International Conference on Networking, Sensing and Control, 2013

2012
RFID-enabled real-time manufacturing information tracking infrastructure for extended enterprises.
J. Intelligent Manufacturing, 2012

Task-driven e-manufacturing resource configurable model.
J. Intelligent Manufacturing, 2012

A case of implementing RFID-based real-time shop-floor material management for household electrical appliance manufacturers.
J. Intelligent Manufacturing, 2012

Guest editorial: digital enterprise technology.
J. Intelligent Manufacturing, 2012

Special issue on 'RFID-Enabled Manufacturing: Insights and Lessons from Industrial Cases'.
Int. J. Computer Integrated Manufacturing, 2012

Radio frequency identification-enabled real-time manufacturing execution system: a case study in an automotive part manufacturer.
Int. J. Computer Integrated Manufacturing, 2012

2011
An Integrated Pricing and Deteriorating Model and a Hybrid Algorithm for a VMI (Vendor-Managed-Inventory) Supply Chain.
IEEE Trans. Automation Science and Engineering, 2011

Real-time work-in-progress management for smart object-enabled ubiquitous shop-floor environment.
Int. J. Computer Integrated Manufacturing, 2011

Analytical target cascading-enabled optimal configuration platform for production service systems.
Int. J. Computer Integrated Manufacturing, 2011

Special issue on '6th CIRP-Sponsored International Conference of Digital Enterprise Technology (DET2009) - Enterprise Informatics'.
Int. J. Computer Integrated Manufacturing, 2011

Optimal service selection and composition for service-oriented manufacturing network.
Int. J. Computer Integrated Manufacturing, 2011

No room for error: RFID-enabled smart point-of-care medication process in hospital wards.
Proceedings of the 2011 IEEE International Conference on RFID-Technologies and Applications, 2011

On storage capacity pooling through the Supply Hub in Industrial Park (SHIP): The impact of demand uncertainty.
Proceedings of the 2011 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2011

RFID-enabled real-time manufacturing execution system for discrete manufacturing: Software design and implementation.
Proceedings of the IEEE International Conference on Networking, Sensing and Control, 2011

Preference Vector Ant Colony System for Minimising Make-span and Energy Consumption in a Hybrid Flow Shop.
Proceedings of the Multi-objective Evolutionary Optimisation for Product Design and Manufacturing., 2011

2010
Planetary-Scale RFID Services in an Age of Uberveillance.
Proceedings of the IEEE, 2010

RFID - A Unique Radio Innovation for the 21st Century.
Proceedings of the IEEE, 2010

Case-based polishing process planning with Fuzzy Set Theory.
J. Intelligent Manufacturing, 2010

Implementation of real-time shop floor manufacturing using RFID technologies.
IJMR, 2010

A game-theoretic approach to generating optimal process plans of multiple jobs in networked manufacturing.
Int. J. Computer Integrated Manufacturing, 2010

Agent-based workflow management for RFID-enabled real-time reconfigurable manufacturing.
Int. J. Computer Integrated Manufacturing, 2010

Metaheuristics to minimise makespan on parallel batch processing machines with dynamic job arrivals.
Int. J. Computer Integrated Manufacturing, 2010

An inner-enterprise knowledge recommender system.
Expert Syst. Appl., 2010

Nash game model for optimizing market strategies, configuration of platform products in a Vendor Managed Inventory (VMI) supply chain for a product family.
European Journal of Operational Research, 2010

2009
Extending analytical target cascading for optimal supply chain network configuration of a product family.
Int. J. Computer Integrated Manufacturing, 2009

Editorial.
Int. J. Computer Integrated Manufacturing, 2009

Collaborative filtering based on workflow space.
Expert Syst. Appl., 2009

Recommender system based on workflow.
Decision Support Systems, 2009

Stackelberg game-theoretic model for optimizing advertising, pricing and inventory policies in vendor managed inventory (VMI) production supply chains.
Computers & Industrial Engineering, 2009

RFID-Enabled Real-Time Manufacturing Information Tracking Infrastructure for Extended Enterprises.
Proceedings of the 6th CIRP-Sponsored International Conference on Digital Enterprise Technology, 2009

Agent-Based Smart Objects Management System for Real-Time Wireless Manufacturing.
Proceedings of the 6th CIRP-Sponsored International Conference on Digital Enterprise Technology, 2009

A Simulation Approach to Hybrid Flowshop Scheduling Using Dispatching Rules.
Proceedings of the 6th CIRP-Sponsored International Conference on Digital Enterprise Technology, 2009

Analytical Target Cascading for Optimal Configuration of Production Service Systems.
Proceedings of the 6th CIRP-Sponsored International Conference on Digital Enterprise Technology, 2009

Two-Stage Product Platform Development for Mass Customization.
Proceedings of the 6th CIRP-Sponsored International Conference on Digital Enterprise Technology, 2009

Critical Event Processing and Its Regulatory Application.
Proceedings of the 6th CIRP-Sponsored International Conference on Digital Enterprise Technology, 2009

2008
A cooperative coevolutionary algorithm for design of platform-based mass customized products.
J. Intelligent Manufacturing, 2008

RFID-enabled real-time wireless manufacturing for adaptive assembly planning and control.
J. Intelligent Manufacturing, 2008

ppXML: A generic and extensible language for lifecycle modelling of platform products.
Computers in Industry, 2008

A chaotic Ant Colony Optimization method for scheduling a single batch-processing machine with non-identical job sizes.
Proceedings of the IEEE Congress on Evolutionary Computation, 2008

2007
Integrated Configuration of Platform Products and Supply Chains for Mass Customization: A Game-Theoretic Approach.
IEEE Trans. Engineering Management, 2007

A generic and extensible information infrastructure framework for mass-customizing platform products.
Int. J. Computer Integrated Manufacturing, 2007

2006
Agent-based modeling of supply chains for distributed scheduling.
IEEE Trans. Systems, Man, and Cybernetics, Part A, 2006

2004
Web-based design review portal with fuzzy set theoretic methods for fuel pump designs.
Int. J. Computer Integrated Manufacturing, 2004

Concurrent Enterprising for Mass Customization.
Concurrent Engineering: R&A, 2004

Special Issue: Platform product development for mass customization.
AI EDAM, 2004

2003
Early Supplier Involvement in New Product Development With WeBid: A Case Study on Video Conferencing System.
J. Comput. Inf. Sci. Eng., 2003

Synchronised Design for X platform for performance measurement on the WWW.
IJTM, 2003

2002
Web-based support for collaborative product design review.
Computers in Industry, 2002

Agent-based Collaboration Between Distributed Web Applications: Case Study on 'Collaborative Design for X' Using CyberCO.
Concurrent Engineering: R&A, 2002

FuzzySTAR: Fuzzy set theory of axiomatic design review.
AI EDAM, 2002

2001
Issues in the development and implementation of web applications for product design and manufacture.
Int. J. Computer Integrated Manufacturing, 2001

Web-integrated manufacturing: recent developments and emerging issues.
Int. J. Computer Integrated Manufacturing, 2001

Web-integrated manufacturing.
Int. J. Computer Integrated Manufacturing, 2001

Web-based Product Design Review: Implementation Perspective.
Proceedings of the Sixth International Conference on Computer Supported Cooperative Work in Design, 2001

POPIM: Pragmatic Online Project Information Management for Collaborative Product Development.
Proceedings of the Sixth International Conference on Computer Supported Cooperative Work in Design, 2001

Key technology in hogging of blanks with large-scale sculptured surfaces.
Proceedings of the ISCA 16th International Conference Computers and Their Applications, 2001

2000
Early Supplier Involvement in New Product Development on the Internet: Implementation Perspectives.
Concurrent Engineering: R&A, 2000

Agent-based workflow management in collaborative product development on the Internet.
Computer-Aided Design, 2000

1999
Web-based morphological charts for concept design in collaborative product development.
J. Intelligent Manufacturing, 1999

1998
The DFX shell: A generic framework for applying 'Design for X' (DFX) tools.
Int. J. Computer Integrated Manufacturing, 1998


  Loading...