Ricardo Ramírez-Mendoza

Orcid: 0000-0002-5122-507X

Affiliations:
  • Monterrey Institute of Technology and Higher Education, Mexico
  • Grenoble Institute of Technology, France


According to our database1, Ricardo Ramírez-Mendoza authored at least 63 papers between 1997 and 2024.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2024
Implementation of a Real-Time Brain-to-Brain Synchrony Estimation Algorithm for Neuroeducation Applications.
Sensors, March, 2024

Experimenting With Soft Robotics in Education: A Systematic Literature Review From 2006 to 2022.
IEEE Trans. Learn. Technol., 2024

2023
Neural Network Inverse Optimal Control of Ground Vehicles.
Neural Process. Lett., December, 2023

Vehicle and Driver Monitoring System Using On-Board and Remote Sensors.
Sensors, January, 2023

Subspace Data-Driven Control for Linear Parameter Varying Systems.
Int. J. Serv. Sci. Manag. Eng. Technol., 2023

2022
Visualizing Street Pavement Anomalies through Fog Computing V2I Networks and Machine Learning.
Sensors, 2022

Digital Twin Technology Challenges and Applications: A Comprehensive Review.
Remote. Sens., 2022

Prognosis patients with COVID-19 using deep learning.
BMC Medical Informatics Decis. Mak., 2022

Direct Data Driven Scheme for UAV Flight Control.
IEEE Access, 2022

Direct Data Driven Model Reference Control for Flight Simulation Table.
IEEE Access, 2022

Data Driven Strategy for Linear Parameter Varying Control Design.
IEEE Access, 2022

On Online Adaptive Direct Data Driven Control.
IEEE Access, 2022

2021
Adaptive iterative correlation tuning for closed loop system with two parametrised controllers.
Int. J. Syst. Sci., 2021

Conditional Maximum likelihood identification for State Space System.
Mechatron. Syst. Control., 2021

An Angular Speed and Position FLL-Based Estimator Using Linear Hall-Effect Sensors.
IEEE Access, 2021

Autonomous Vehicles as a Development Platform: From High School to Faculty.
Proceedings of the IEEE Global Engineering Education Conference, 2021

2020
Introducing System Identification Strategy into Model Predictive Control.
J. Syst. Sci. Complex., 2020

Stealth identification strategy for closed loop system structure.
Int. J. Syst. Sci., 2020

Robust model predictive control based on interval predictor estimation.
Int. J. Syst. Syst. Eng., 2020

Application of ellipsoidal approximation into target tracking for multi UAVs formation cooperative detection.
Int. J. Model. Identif. Control., 2020

Design Of Interactive Learning Cyber-Physical Tools for Mechanical Design Engineering Courses.
Proceedings of the 2020 IEEE Global Engineering Education Conference, 2020

Advanced Learning Assistant System (ALAS) for Engineering Education.
Proceedings of the 2020 IEEE Global Engineering Education Conference, 2020

2019
Stability analysis in cooperative distributed model predictive control.
Int. J. Syst. Syst. Eng., 2019

Survey on biometry for cognitive automotive systems.
Cogn. Syst. Res., 2019

A Simulation Approach of the Internet of Intelligent Vehicles for Closed Routes in Urban Environments.
Proceedings of the 42nd International Conference on Telecommunications and Signal Processing, 2019

Multicultural Experiences in Global Projects.
Proceedings of the IEEE Global Engineering Education Conference, 2019

Knowledge Generation in Higher Education Institutions.
Proceedings of the IEEE Global Engineering Education Conference, 2019

Transdisciplinary Learning Community: A Model to Enhance Collaboration between Higher Education Institutions and Society.
Proceedings of the IEEE Global Engineering Education Conference, 2019

2018
An Adaptive Curvature-Guided Approach for the Knot-Placement Problem in Fitted Splines.
J. Comput. Inf. Sci. Eng., 2018

An industry-academia model for research.
Proceedings of the 2018 IEEE Global Engineering Education Conference, 2018

Engineering Education 4.0: - proposal for a new Curricula.
Proceedings of the 2018 IEEE Global Engineering Education Conference, 2018

Towards a disruptive active learning engineering education.
Proceedings of the 2018 IEEE Global Engineering Education Conference, 2018

The PACE experience: Global collaborative engineering course and global projects.
Proceedings of the 2018 IEEE Global Engineering Education Conference, 2018

2017
A 3-SPS-1S parallel robot-based laser sensing for applications in precision agriculture.
Soft Comput., 2017

Design and Implementation of a Low Cost Prosthetic Hand.
Proceedings of the Towards Autonomous Robotic Systems - 18th Annual Conference, 2017

2016
Emotional Domotics: Inhabitable Space Variable Control for the Emotions Modulation.
Proceedings of SAI Intelligent Systems Conference (IntelliSys) 2016, 2016

Chassis Control based on Fuzzy Logic.
Proceedings of the 2016 IEEE International Conference on Fuzzy Systems, 2016

Health Wearables for Early Detection of Frailty Syndrome in Older Adults in Mexico: An Informed, Structured Process for the Selection of a Suitable Device.
Proceedings of the 7th International Conference on Emerging Ubiquitous Systems and Pervasive Networks (EUSPN 2016)/The 6th International Conference on Current and Future Trends of Information and Communication Technologies in Healthcare (ICTH-2016)/Affiliated Workshops, 2016

Teaching semi-active suspension control using an experimental platform.
Proceedings of the 2016 American Control Conference, 2016

2014
AI-Based Design of a Parallel Robot Used as a Laser Tracker System: Intelligent vs. Nonlinear Classical Controllers.
Proceedings of the Nature-Inspired Computation and Machine Learning, 2014

Experimental ANN-based modeling of an adjustable damper.
Proceedings of the 2014 International Joint Conference on Neural Networks, 2014

2013
8th SAFEPROCESS 2012: Special Section.
Annu. Rev. Control., 2013

Fault tolerant control with additive compensation for faults in an automotive damper?
Proceedings of 10th IEEE International Conference on Networking, Sensing and Control, 2013

Suspension control strategy for a fully electrified vehicle.
Proceedings of the 12th European Control Conference, 2013

2012
<i>H</i><sub>∞</sub> control of a suspension with a magnetorheological damper.
Int. J. Control, 2012

MR Damper Identification using ANN based on 1-Sensor - A Tool for Semiactive Suspension Control Compliance.
Proceedings of the IJCCI 2012 - Proceedings of the 4th International Joint Conference on Computational Intelligence, Barcelona, Spain, 5, 2012

2011
Fault Detection in a Heat Exchanger, Comparative Analysis between Dynamic Principal Component Analysis and Diagnostic Observers.
Computación y Sistemas, 2011

Comparison of Artificial Neural Networks and Dynamic Principal Component Analysis for Fault Diagnosis.
Proceedings of the Modern Approaches in Applied Intelligence, 2011

2010
Mechatronics Design Methodology applied at manufacturing companies.
Int. J. Manuf. Technol. Manag., 2010

2009
MR-Damper based Control System.
Proceedings of the IEEE International Conference on Systems, 2009

Magneto-Rheological Damper Modelling.
Proceedings of the 2009 International Conference on Modeling, 2009

Design of experiments for MR damper modelling.
Proceedings of the International Joint Conference on Neural Networks, 2009

Building Training Patterns for Modelling MR Dampers.
Proceedings of the ICINCO 2009, Proceedings of the 6th International Conference on Informatics in Control, Automation and Robotics, 2009

Online prediction of surface roughness in peripheral milling processes.
Proceedings of the 10th European Control Conference, 2009

IMC-based control system on a MR damper.
Proceedings of the 10th European Control Conference, 2009

Fuzzy control for a semi-active vehicle suspension with a magnetorheological damper.
Proceedings of the 10th European Control Conference, 2009

Takagi-Sugeno fuzzy model of a semi-active suspension with a magnetorheological damper.
Proceedings of the 10th European Control Conference, 2009

Robust control applied towards Rendezvous and Docking.
Proceedings of the 10th European Control Conference, 2009

2007
Controller Area Network Frames Decoder.
Proceedings of the 2007 International Conference on Artificial Intelligence, 2007

2005
A Fault Detection Approach Based on Machine Learning Models.
Proceedings of the MICAI 2005: Advances in Artificial Intelligence, 2005

Towards a new fault diagnosis system for electric machines based on dynamic probabilistic models.
Proceedings of the American Control Conference, 2005

2004
Toward a New Approach for Online Fault Diagnosis Combining Particle Filtering and Parametric Identification.
Proceedings of the MICAI 2004: Advances in Artificial Intelligence, 2004

1997
Sur la modélisation et la commande de véhicules automobiles. (On the modeling and control of automotive vehicles).
PhD thesis, 1997


  Loading...