Shingo Maeda

Orcid: 0000-0002-9814-4533

According to our database1, Shingo Maeda authored at least 51 papers between 2004 and 2024.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2024
A Stretchable Jamming Gripper Grasping Flat Plates.
IEEE Access, 2024

2023
Reservoir Computing Model for Human Hand Locomotion Signal Classification.
IEEE Access, 2023

Pre-Strain Method for Stretchable Strain Sensors With Linear Sensitivity Using Acrylic Elastomer and CNTs Powder.
IEEE Access, 2023

A Method for Controlling the Continuous Transparency of Three-dimensional Objects Utilizing Mechanical Emulsification.
Proceedings of the Seventeenth International Conference on Tangible, 2023

Demonstrating InflatableMod: Untethered and Reconfigurable Inflatable Modules for Tabletop-sized Pneumatic Physical Interfaces.
Proceedings of the Extended Abstracts of the 2023 CHI Conference on Human Factors in Computing Systems, 2023

InflatableMod: Untethered and Reconfigurable Inflatable Modules for Tabletop-sized Pneumatic Physical Interfaces.
Proceedings of the 2023 CHI Conference on Human Factors in Computing Systems, 2023

Scaled-down of high-voltage circuits for dielectric elastomer actuators.
Proceedings of the IEEE International Conference on Cyborg and Bionic Systems, 2023

2022
Self-Actuating and Nonelectronic Machines.
J. Robotics Mechatronics, 2022

Low-Voltage Activation Based on Electrohydrodynamics in Positioning Systems for Untethered Robots.
J. Robotics Mechatronics, 2022

Fabrication of Soft and Wearable Electrostatic Generator Based on Streaming Electrification.
Adv. Intell. Syst., 2022

Implementation of Reservoir Computing Algorithm in Stretchable Sensor for Wearable Device.
Proceedings of the International Symposium on Micro-NanoMechatronics and Human Science, 2022

Fabrication of a stretchable electroadhesive pad.
Proceedings of the International Symposium on Micro-NanoMechatronics and Human Science, 2022

Demonstrating HydroMod : Constructive Modules for Prototyping Hydraulic Physical Interfaces.
Proceedings of the CHI '22: CHI Conference on Human Factors in Computing Systems, New Orleans, LA, USA, 29 April 2022, 2022

HydroMod : Constructive Modules for Prototyping Hydraulic Physical Interfaces.
Proceedings of the CHI '22: CHI Conference on Human Factors in Computing Systems, New Orleans, LA, USA, 29 April 2022, 2022

2021
Soft Robotic Gripper Based on Multi-Layers of Dielectric Elastomer Actuators.
J. Robotics Mechatronics, 2021

A DIY Fabrication Approach of Stretchable Sensors Using Carbon Nano Tube Powder for Wearable Device.
Frontiers Robotics AI, 2021

Wireless Electrohydrodynamic Actuators for Propulsion and Positioning of Miniaturized Floating Robots.
Adv. Intell. Syst., 2021

Programming Stepwise Motility into a Sheet of Paper Using Inkjet Printing.
Adv. Intell. Syst., 2021

Characteristic Evaluation of Dielectric Elastomer Actuator Based on The Stretchable Electrode Density.
Proceedings of the 4th IEEE International Conference on Soft Robotics, 2021

Dynamic characteristics of a dielectric elastomer actuator fabricated using a stretchable CNT powder electrode.
Proceedings of the International Symposium on Micro-NanoMechatronics and Human Science, 2021

2020
Optimization of the Electrode Arrangement and Reliable Fabrication of Flexible EHD Pumps.
J. Robotics Mechatronics, 2020

2019
A Deformable Motor Driven by Dielectric Elastomer Actuators and Flexible Mechanisms.
Frontiers Robotics AI, 2019

Self-Assembled 3D Actuator Using the Resilience of an Elastomeric Material.
Frontiers Robotics AI, 2019

2018
Printed self-oscillatory mechanism inspired by an electric bell.
Proceedings of the International Symposium on Micro-NanoMechatronics and Human Science, 2018

Study of Low Energy Micro EHD Pump by Designed Electric Field.
Proceedings of the International Symposium on Micro-NanoMechatronics and Human Science, 2018

Robots Based On Chemical System.
Proceedings of the International Symposium on Micro-NanoMechatronics and Human Science, 2018

2017
Printed Paper Robot Driven by Electrostatic Actuator.
IEEE Robotics Autom. Lett., 2017

Swinging paper actuator driven by conduction electrohydrodynamics.
Proceedings of the 2017 IEEE International Conference on Robotics and Biomimetics, 2017

Simultaneous printing of multiple origami structures.
Proceedings of the International Symposium on Micro-NanoMechatronics and Human Science, 2017

Analysis of EHD pump with planer electrodes using FEM simulation.
Proceedings of the International Symposium on Micro-NanoMechatronics and Human Science, 2017

Fundamental study on electrically-induced bubble catalytic plating technology.
Proceedings of the International Symposium on Micro-NanoMechatronics and Human Science, 2017

Active suction cup actuated by ElectroHydroDynamics phenomenon.
Proceedings of the 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2017

2015
Kirigami robot: Making paper robot using desktop cutting plotter and inkjet printer.
Proceedings of the 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2015

2014
Peristaltic motion of tubular gel driven by acid-autocatalytic reaction.
Adv. Robotics, 2014

Design of self-moving gel driven by chemical energy.
Proceedings of the 2014 IEEE International Conference on Robotics and Biomimetics, 2014

Design of electrostatic adhesion device using the flexible electrodes.
Proceedings of the 2014 International Symposium on Micro-NanoMechatronics and Human Science, 2014

Design of paper mechatronics: Towards a fully printed robot.
Proceedings of the 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2014

2013
A design of self-sustained gel actuator.
Proceedings of the 10th International Conference on Ubiquitous Robots and Ambient Intelligence, 2013

A self-assembling method for polymer gel components.
Proceedings of the IEEE International Conference on Robotics and Biomimetics, 2013

Active gel locomotion.
Proceedings of the International Symposium on Micro-NanoMechatronics and Human Science, 2013

Self-beating gel pump powered by chemical energy.
Proceedings of the 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2013

2012
Capsule gel robot driven by self-propelled oil droplet.
Proceedings of the 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2012

2011
Tubular gel motility driven by chemical reaction networks.
Proceedings of the 2011 IEEE International Conference on Robotics and Biomimetics, 2011

Peristaltic gel pump driven by chemical energy.
Proceedings of the 2011 IEEE International Conference on Robotics and Biomimetics, 2011

2009
Development of novel self-oscillating gel actuator for achievement of chemical robot.
Proceedings of the 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2009

Chemical robot-design of peristaltic polymer gel actuator-.
Proceedings of the 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2009

Development of novel self-oscillating molecular robot fueled by organic acid.
Proceedings of the 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2009

2008
Self-Oscillating Gel Actuator for Chemical Robotics.
Adv. Robotics, 2008

2007
Chemical robot - Design of self-walking gel.
Proceedings of the 2007 IEEE/RSJ International Conference on Intelligent Robots and Systems, October 29, 2007

2005
Integration of Computational Fluid Dynamics and Computational Aero Acoustics on Grid for Dental Applications.
Proceedings of the 18th IEEE Symposium on Computer-Based Medical Systems (CBMS 2005), 2005

2004
Design of chemo-mechanical actuator using self-oscillating gel.
Proceedings of the 2004 IEEE International Conference on Robotics and Biomimetics, 2004


  Loading...