Andrea Tilli
Orcid: 0000-0001-5079-5065
According to our database1,
Andrea Tilli
authored at least 63 papers
between 1998 and 2023.
Collaborative distances:
Collaborative distances:
Timeline
Legend:
Book In proceedings Article PhD thesis Dataset OtherLinks
Online presence:
-
on orcid.org
On csauthors.net:
Bibliography
2023
Robust Global Asymptotic Stabilization of Linear Cascaded Systems With Hysteretic Interconnection.
IEEE Control. Syst. Lett., 2023
2022
A Hybrid Sensorless Observer for the Robust Global Asymptotic Flux Reconstruction of Permanent Magnet Synchronous Machines.
IEEE Control. Syst. Lett., 2022
Proceedings of the IEEE Conference on Control Technology and Applications, 2022
2021
IEEE Trans. Sustain. Comput., 2021
RUL prediction for automatic machines: a mixed edge-cloud solution based on model-of-signals and particle filtering techniques.
J. Intell. Manuf., 2021
Periodic Motion Optimization for an Underactuated Mechanical System through Synergistic Structure-Control Design.
Proceedings of the 29th Mediterranean Conference on Control and Automation, 2021
Low-Input Accurate Periodic Motion of an Underactuated Mechanism: Mass Distribution and Nonlinear Spring Shaping.
Proceedings of the IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2021
2020
A Semi-global Hybrid Sensorless Observer for Permanent Magnets Synchronous Machines with Unknown Mechanical Model.
CoRR, 2020
A Robust Sensorless Controller-Observer Strategy for PMSMs with Unknown Resistance and Mechanical Model.
CoRR, 2020
Proceedings of the 38th IEEE International Conference on Computer Design, 2020
2019
Towards sensorless observers for sinusoidal electric machines with variable speed and no mechanical model: A promising approach for PMSMs.
Syst. Control. Lett., 2019
Proceedings of the 26th IEEE International Conference on Electronics, Circuits and Systems, 2019
Condition monitoring of ball bearings using estimated AR models as logistic regression features.
Proceedings of the 17th European Control Conference, 2019
Constrained-Inversion MRAC: An Approach Combining Hard Constraints and Adaptation in Uncertain Nonlinear Systems.
Proceedings of the 58th IEEE Conference on Decision and Control, 2019
2018
Global Observability Analysis of Aided-INS for UAVs Equipped with Visual Odometry Systems.
Proceedings of the 16th European Control Conference, 2018
2017
State reference design and saturated control of doubly-fed induction generators under voltage dips.
Int. J. Control, 2017
2016
IEEE Trans. Ind. Informatics, 2016
IEEE Trans. Control. Syst. Technol., 2016
Semiglobal Uniform Asymptotic Stability of an Easy-to-Implement PLL-Like Sensorless Observer for Induction Motors.
IEEE Trans. Autom. Control., 2016
Zero dynamics trajectory planning in output control of Doubly Fed Induction Machines.
Proceedings of the IECON 2016, 2016
Recovery of the voltage-dip speed increase in wind turbine by offline trajectory planning.
Proceedings of the IECON 2016, 2016
Proceedings of the IECON 2016, 2016
2015
ACM Trans. Embed. Comput. Syst., 2015
Proceedings of the 2015 Design, Automation & Test in Europe Conference & Exhibition, 2015
2014
Bias-Compensated Least Squares Identification of Distributed Thermal Models for Many-Core Systems-on-Chip.
IEEE Trans. Circuits Syst. I Regul. Pap., 2014
IEEE Trans. Computers, 2014
Globally asymptotically stable reconstruction of flux, rotor position and speed for permanent magnets machines.
Proceedings of the 22nd Mediterranean Conference on Control and Automation, 2014
Proceedings of the 2014 IEEE Conference on Control Applications, 2014
2013
Thermal and Energy Management of High-Performance Multicores: Distributed and Self-Calibrating Model-Predictive Controller.
IEEE Trans. Parallel Distributed Syst., 2013
Errors-in-variables identification of thermal models for many-core computing systems.
Proceedings of the 12th European Control Conference, 2013
Proceedings of the Design, Automation and Test in Europe, 2013
Proceedings of the 52nd IEEE Conference on Decision and Control, 2013
Modeling and control design for power systems driven by battery/supercapacitor hybrid energy storage devices.
Proceedings of the American Control Conference, 2013
2012
Discussion on: "A Saturated PI Velocity Controller for Voltage-Fed Induction Motors".
Eur. J. Control, 2012
Don't burn your mobile!: safe computational re-sprinting via model predictive control.
Proceedings of the 10th International Conference on Hardware/Software Codesign and System Synthesis, 2012
Thermal models characterization for reliable temperature capping and performance optimization in Multiprocessor Systems on Chip.
Proceedings of the American Control Conference, 2012
Proceedings of the American Control Conference, 2012
2011
Analysis, Dimensioning and Robust Control of Shunt Active Filter for Harmonic Currents Compensation in Electrical Mains
CoRR, 2011
Proceedings of the Integrated Circuit and System Design. Power and Timing Modeling, Optimization, and Simulation, 2011
Proceedings of the 3rd Many-core Applications Research Community (MARC) Symposium. Proceedings of the 3rd MARC Symposium, 2011
A distributed and self-calibrating model-predictive controller for energy and thermal management of high-performance multicores.
Proceedings of the Design, Automation and Test in Europe, 2011
2010
A virtual platform environment for exploring power, thermal and reliability management control strategies in high-performance multicores.
Proceedings of the 20th ACM Great Lakes Symposium on VLSI 2009, 2010
Logic Device Agents: Smart and highly reusable components in industrial automation systems.
Proceedings of 15th IEEE International Conference on Emerging Technologies and Factory Automation, 2010
2009
Architectural design patterns for logic control of manufacturing systems: The generalized device.
Proceedings of the XXII International Symposium on Information, 2009
A preliminary step towards the Switched Linear Internal Model control: The asymptotic observer problem.
Proceedings of the 10th European Control Conference, 2009
Hierarchical and Cooperative Approaches to Logic Control Design in Industrial Automation.
Proceedings of 12th IEEE International Conference on Emerging Technologies and Factory Automation, 2009
2008
Rapid prototyping of logic control in industrial automation exploiting the generalized actuator approach.
Proceedings of 13th IEEE International Conference on Emerging Technologies and Factory Automation, 2008
2007
Speed Sensorless Control of Induction Motors Based on a Reduced-Order Adaptive Observer.
IEEE Trans. Control. Syst. Technol., 2007
Autom., 2007
2006
A speed-sensorless indirect field-oriented control for induction motors based on high gain speed estimation.
Autom., 2006
Proceedings of the 45th IEEE Conference on Decision and Control, 2006
Proceedings of the 45th IEEE Conference on Decision and Control, 2006
2005
IEEE Trans. Control. Syst. Technol., 2005
Proceedings of the 44th IEEE IEEE Conference on Decision and Control and 8th European Control Conference Control, 2005
2004
Proceedings of the 43rd IEEE Conference on Decision and Control, 2004
Proceedings of the 43rd IEEE Conference on Decision and Control, 2004
2003
Indirect stator flux-oriented output feedback control of a doubly fed induction machine.
IEEE Trans. Control. Syst. Technol., 2003
Control of shunt active filter based on the internal model principle: Tuning procedure and experimental results.
Proceedings of the 7th European Control Conference, 2003
Proceedings of the 7th European Control Conference, 2003
Sensorless indirect field oriented control of induction motor via adaptive speed observer.
Proceedings of the American Control Conference, 2003
Proceedings of the American Control Conference, 2003
2000
IEEE Trans. Control. Syst. Technol., 2000
1998
IEEE Trans. Ind. Electron., 1998