Andrew Y. C. Nee

According to our database1, Andrew Y. C. Nee authored at least 98 papers between 1992 and 2019.

Collaborative distances:

Awards

IEEE Fellow

IEEE Fellow 1994, "For leadership in the conception, standardization, and deployment strategy of the synchronous optical network (SONET).".

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2019
Digital Twin in Industry: State-of-the-Art.
IEEE Trans. Ind. Informatics, 2019

A Mobile Solution for Augmenting a Manufacturing Environment with User-Generated Annotations.
Inf., 2019

An approach for augmented learning of finite element analysis.
Comput. Appl. Eng. Educ., 2019

2018
Mobile augmented reality visualization and collaboration techniques for on-site finite element structural analysis.
Int. J. Model. Simul. Sci. Comput., 2018

An Internet of things and cloud-based approach for energy consumption evaluation and analysis for a product.
Int. J. Comput. Integr. Manuf., 2018

Enhancing mechanisms education through interaction with augmented reality simulation.
Comput. Appl. Eng. Educ., 2018

2017
Advanced manufacturing systems: socialization characteristics and trends.
J. Intell. Manuf., 2017

Visualization and interaction of finite element analysis in augmented reality.
Comput. Aided Des., 2017

2016
Registration of a hybrid robot using the Degradation-Kronecker method and a purely nonlinear method.
Robotica, 2016

A tracking solution for mobile augmented reality based on sensor-aided marker-less tracking and panoramic mapping.
Multim. Tools Appl., 2016

An Augmented Reality-Assisted Therapeutic Healthcare Exercise System Based on Bare-Hand Interaction.
Int. J. Hum. Comput. Interact., 2016

Optimization design of general triglide parallel manipulators.
Adv. Robotics, 2016

Multi-modal augmented-reality assembly guidance based on bare-hand interface.
Adv. Eng. Informatics, 2016

Automatic Information Positioning Scheme in AR-assisted Maintenance Based on Visual Saliency.
Proceedings of the Augmented Reality, Virtual Reality, and Computer Graphics, 2016

2015
A swarm optimization approach for solving workspace determination of parallel manipulators.
Robotica, 2015

A context-aware augmented reality assisted maintenance system.
Int. J. Comput. Integr. Manuf., 2015

A simulation-based genetic algorithm approach for remanufacturing process planning and scheduling.
Appl. Soft Comput., 2015

Real-time finite element structural analysis in augmented reality.
Adv. Eng. Softw., 2015

2013
An improved intelligent water drops algorithm for solving multi-objective job shop scheduling.
Eng. Appl. Artif. Intell., 2013

Improved Intelligent Water Drops Optimization for Single and Multiple Objective Job Shop Scheduling.
Proceedings of the 7th IFAC Conference on Manufacturing Modelling, Management, and Control, 2013

Virtual and Augmented Reality Applications in Manufacturing.
Proceedings of the 7th IFAC Conference on Manufacturing Modelling, Management, and Control, 2013

2012
A novel approach in rehabilitation of hand-eye coordination and finger dexterity.
Virtual Real., 2012

Augmented Reality based Rehabilitation System with Self-designed Data-glove.
Proceedings of the PECCS 2012, 2012

2011
Development of a shoe-mounted assistive user interface for navigation.
Int. J. Sens. Networks, 2011

Vision-Based Hand Interaction in Augmented Reality Environment.
Int. J. Hum. Comput. Interact., 2011

Multi-agent-based Pay-Per-Use (PpU) distributed manufacturing.
Int. J. Comput. Appl. Technol., 2011

GRAONTO: A graph-based approach for automatic construction of domain ontology.
Expert Syst. Appl., 2011

A surface blending approach for displacement features on freeform surfaces.
Comput. Aided Des., 2011

A Setup Planning Approach Considering Tolerance Cost Factors.
Proceedings of the Multi-objective Evolutionary Optimisation for Product Design and Manufacturing., 2011

Augmented Reality in Product Development and Manufacturing.
Proceedings of the Handbook of Augmented Reality, 2011

Augmented Reality in Assistive Technology and Rehabilitation Engineering.
Proceedings of the Handbook of Augmented Reality, 2011

2010
Development of an AR system achieving <i>in situ</i> machining simulation on a 3-axis CNC machine.
Comput. Animat. Virtual Worlds, 2010

A multi-regional computation scheme in an AR-assisted in situ CNC simulation environment.
Comput. Aided Des., 2010

A Multiple Sensor-based Shoe-mounted User Interface Designed for Navigation Systems for the Visually Impaired.
Proceedings of the 5th Annual International Conference on Wireless Internet, 2010

A PSO algorithm for mapping the workspace boundary of parallel manipulators.
Proceedings of the IEEE International Conference on Robotics and Automation, 2010

Automatic Ontology Construction for Manufacturing Knowledge and Information Management.
Proceedings of the KEOD 2010, 2010

An Affordable Augmented Reality Based Rehabilitation System for Hand Motions.
Proceedings of the 2010 International Conference on CyberWorlds, 2010

2009
Optimal Design of Hierarchic Components Platform under Hybrid Modular Architecture.
Concurr. Eng. Res. Appl., 2009

Assembly Design and Evaluation Based on Bare-Hand Interaction in an Augmented Reality Environment.
Proceedings of the 2009 International Conference on CyberWorlds, 2009

Robot Programming Using Augmented Reality.
Proceedings of the 2009 International Conference on CyberWorlds, 2009

Computer vision centric hybrid tracking for augmented reality in outdoor urban environments.
Proceedings of the 8th International Conference on Virtual Reality Continuum and its Applications in Industry, 2009

2008
Editorial.
J. Intell. Manuf., 2008

Applying Ant Colony Optimisation (ACO) algorithm to dynamic job shop scheduling problems.
Int. J. Manuf. Res., 2008

Simulating the generic job shop as a multi-agent system.
Int. J. Intell. Syst. Technol. Appl., 2008

Product information visualization and augmentation in collaborative design.
Comput. Aided Des., 2008

AR-assisted <i>in situ</i> machining simulation: architecture and implementation.
Proceedings of the 7th International Conference on Virtual Reality Continuum and its Applications in Industry, 2008

Collaborative design in 3D space.
Proceedings of the 7th International Conference on Virtual Reality Continuum and its Applications in Industry, 2008

A differential GPS carrier phase technique for precision outdoor AR tracking.
Proceedings of the 7th IEEE and ACM International Symposium on Mixed and Augmented Reality, 2008

Tampered Image Detection Using Image Matching.
Proceedings of the Fifth International Conference on Computer Graphics, 2008

2007
Methodologies for Immersive Robot Programming in an Augmented Reality Environment.
Int. J. Virtual Real., 2007

A web-based multi-agent system for distributed digital manufacturing.
Int. J. Comput. Integr. Manuf., 2007

Reflectance modeling for a textured object under uncontrolled illumination from high dynamic range maps.
Comput. Graph., 2007

Integration of genetic algorithm and Gantt chart for job shop scheduling in distributed manufacturing systems.
Comput. Ind. Eng., 2007

Markerless Augmented Reality Using a Robust Point Transferring Method.
Proceedings of the Advances in Multimedia Modeling, 2007

2006
Intelligent Process Planning Optimization for Product Cost Estimation.
Proceedings of the Integrated Intelligent Systems for Engineering Design, 2006

Registration Using Natural Features for Augmented Reality Systems.
IEEE Trans. Vis. Comput. Graph., 2006

Communication and coordination in multi-agent manufacturing systems.
Int. J. Manuf. Res., 2006

Accessibility comparison for optimal cutter selection in five-axis finish milling of sculptured surfaces.
Int. J. Manuf. Res., 2006

A methodology for evaluating the manufacturing ability of equipment in virtual enterprises.
Int. J. Comput. Integr. Manuf., 2006

Real-time, dynamic level-of-detail management for three-axis NC milling simulation.
Comput. Aided Des., 2006

A Volumetric Model-Based CNC Simulation and Monitoring System in Augmented Environments.
Proceedings of the 5th International Conference on Cyberworlds (CW 2006), 2006

A Framework for Multiple-View Product Representation Using Augmented Reality.
Proceedings of the 5th International Conference on Cyberworlds (CW 2006), 2006

A markerless registration method for augmented reality based on affine properties.
Proceedings of the User Interfaces 2006, 2006

2005
Registration Based on Projective Reconstruction Technique for Augmented Reality Systems.
IEEE Trans. Vis. Comput. Graph., 2005

A generalized registration method for augmented reality systems.
Comput. Graph., 2005

A Web-based process planning optimization system for distributed design.
Comput. Aided Des., 2005

An Agent-based Platform for Web-enabled Equipment Predictive Maintenance.
Proceedings of the 2005 IEEE/WIC/ACM International Conference on Intelligent Agent Technology, 2005

Tracking points using projective reconstruction for augmented reality.
Proceedings of the 3rd International Conference on Computer Graphics and Interactive Techniques in Australasia and Southeast Asia 2005, Dunedin, New Zealand, November 29, 2005

An adaptive fixture design system for integrated product and process design.
Proceedings of the IEEE International Conference on Automation Science and Engineering, 2005

2004
Modeling, analysis, and verification of optimal fixturing design.
IEEE Trans Autom. Sci. Eng., 2004

The virtual interaction panel: an easy control tool in augmented reality systems.
Comput. Animat. Virtual Worlds, 2004

Bus maintenance scheduling using multi-agent systems.
Eng. Appl. Artif. Intell., 2004

Methods for feature-based design of heterogeneous solids.
Comput. Aided Des., 2004

Developing distributed applications for integrated product and process design.
Comput. Aided Des., 2004

Feature-based design in a distributed and collaborative environment.
Comput. Aided Des., 2004

Distributed CAD for supporting Internet collaborative design.
Comput. Aided Des., 2004

Registration using projective reconstruction for augmented reality systems.
Proceedings of the Proceedings VRCAI 2004, 2004

2003
A modified genetic algorithm for distributed scheduling problems.
J. Intell. Manuf., 2003

STEP-based integration of feature recognition and design-by-feature for manufacturing applications in a concurrent engineering environment.
Int. J. Comput. Appl. Technol., 2003

Tool path regeneration for mold design modification.
Comput. Aided Des., 2003

Development of an Internet-enabled interactive fixture design system.
Comput. Aided Des., 2003

An approach to identify design and manufacturing features from a data exchanged part model.
Comput. Aided Des., 2003

A Tabu Search-Based Optimization Approach for Process Planning.
Proceedings of the Knowledge-Based Intelligent Information and Engineering Systems, 2003

2002
Web-based Multi-functional Scheduling System for a Distributed Manufacturing Environment.
Concurr. Eng. Res. Appl., 2002

Recognizing manufacturing features from a design-by-feature model.
Comput. Aided Des., 2002

The application of surface visibility and moldability to parting line generation.
Comput. Aided Des., 2002

2001
Philosophies for integrated product development.
Int. J. Technol. Manag., 2001

2000
Agent-Based Product Design and Planning for Distributed Concurrent Engineering.
Proceedings of the 2000 IEEE International Conference on Robotics and Automation, 2000

1999
Undercut feature recognition in an injection mould design system.
Comput. Aided Des., 1999

Modeling Process Planning Problems in an Optimization Perspective.
Proceedings of the 1999 IEEE International Conference on Robotics and Automation, 1999

1998
Automated process parameter resetting for injection moulding: a fuzzy-neuro approach.
J. Intell. Manuf., 1998

Configuration of progressive dies.
Artif. Intell. Eng. Des. Anal. Manuf., 1998

1997
Using genetic algorithms in process planning for job shop machining.
IEEE Trans. Evol. Comput., 1997

1996
Geometric Feature Detection for Reverse Engineering Using Range Imaging.
J. Vis. Commun. Image Represent., 1996

Fuzzy-set-based approach for concurrent constraint set-up planning.
J. Intell. Manuf., 1996

Qualitative primitive identification using fuzzy clustering and invariant approach.
Image Vis. Comput., 1996

1995
Generic form feature recognition and operation selection using connectionist modelling.
J. Intell. Manuf., 1995

1992
Expert fixture-design system for an automated manufacturing environment.
Comput. Aided Des., 1992


  Loading...