Dominique Bonvin

According to our database1, Dominique Bonvin authored at least 65 papers between 1992 and 2020.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Other 

Links

Homepages:

On csauthors.net:

Bibliography

2020
A note on efficient computation of privileged directions in modifier adaptation.
Computers & Chemical Engineering, 2020

2019
Distributed modifier-adaptation schemes for the real-time optimisation of uncertain interconnected systems.
Int. J. Control, 2019

Maximum-likelihood estimation of kinetic parameters via the extent-based incremental approach.
Computers & Chemical Engineering, 2019

Analysis of output modifier adaptation for real-time optimization.
Computers & Chemical Engineering, 2019

Education in Process Systems Engineering: Why it matters more than ever and how it can be structured.
Computers & Chemical Engineering, 2019

2018
Real-Time Optimizing Control of an Experimental Crosswind Power Kite.
IEEE Trans. Contr. Sys. Techn., 2018

Active directional modifier adaptation for real-time optimization.
Computers & Chemical Engineering, 2018

Challenges in process optimization for new feedstocks and energy sources.
Computers & Chemical Engineering, 2018

A distributed feasible-side convergent modifier-adaptation scheme for interconnected systems, with application to gas-compressor stations.
Computers & Chemical Engineering, 2018

On decoupling rate processes in chemical reaction systems - Methods and applications.
Computers & Chemical Engineering, 2018

NMPC using Pontryagin's Minimum Principle-Application to a two-phase semi-batch hydroformylation reactor under uncertainty.
Computers & Chemical Engineering, 2018

Optimal Load Sharing for Serial Compressors via Modifier Adaptation.
Proceedings of the 2018 European Control Conference, 2018

Active Directional Modifier Adaptation with Trust Region- Application to Energy-Harvesting Kites.
Proceedings of the 2018 European Control Conference, 2018

Real-Time optimization of Uncertain Process Systems via Modifier Adaptation and Gaussian Processes.
Proceedings of the 2018 European Control Conference, 2018

2017
Exact turnpike properties and economic NMPC.
Eur. J. Control, 2017

Crosswind kite control - A benchmark problem for advanced control and dynamic optimization.
Eur. J. Control, 2017

Data reconciliation for chemical reaction systems using vessel extents and shape constraints.
Computers & Chemical Engineering, 2017

Shape constrained splines as transparent black-box models for bioprocess modeling.
Computers & Chemical Engineering, 2017

Modifier adaptation with guaranteed feasibility in the presence of gradient uncertainty.
Computers & Chemical Engineering, 2017

Dynamic optimization of constrained semi-batch processes using Pontryagin's minimum principle - An effective quasi-Newton approach.
Computers & Chemical Engineering, 2017

On turnpike and dissipativity properties of continuous-time optimal control problems.
Autom., 2017

2016
Extension of modifier adaptation for controlled plants using static open-loop models.
Computers & Chemical Engineering, 2016

On the various local solutions to a two-input dynamic optimization problem.
Computers & Chemical Engineering, 2016

Time-optimal path-following operation in the presence of uncertainty.
Proceedings of the 2016 European Control Conference, 2016

Optimal load sharing of parallel compressors via modifier adaptation.
Proceedings of the 2016 IEEE Conference on Control Applications, 2016

2015
Control and Optimization of Batch Processes.
Proceedings of the Encyclopedia of Systems and Control, 2015

Variant and invariant states for chemical reaction systems.
Computers & Chemical Engineering, 2015

Directional real-time optimization applied to a kite-control simulation benchmark.
Proceedings of the European Control Conference, 2015

On the design of economic NMPC based on approximate turnpike properties.
Proceedings of the 54th IEEE Conference on Decision and Control, 2015

2014
Turnpike and dissipativity properties in dynamic real-time optimization and economic MPC.
Proceedings of the 53rd IEEE Conference on Decision and Control, 2014

2013
A quotient method for designing nonlinear controllers.
Eur. J. Control, 2013

On the role of the necessary conditions of optimality in structuring dynamic real-time optimization schemes.
Computers & Chemical Engineering, 2013

Real-Time Optimization for Kites.
Proceedings of the 5th IFAC International Workshop on Periodic Control Systems, 2013

2012
Directional Input Adaptation in Parametric Optimal Control Problems.
SIAM J. Control and Optimization, 2012

Quotient method for stabilising a ball-on-a-wheel system - Experimental results.
Proceedings of the 51th IEEE Conference on Decision and Control, 2012

Avoiding feedback-linearization singularity using a quotient method - The field-controlled DC motor case.
Proceedings of the American Control Conference, 2012

Exploiting local quasiconvexity for gradient estimation in modifier-adaptation schemes.
Proceedings of the American Control Conference, 2012

Minimal state representation for open fluid-fluid reaction systems.
Proceedings of the American Control Conference, 2012

2010
Non-iterative Data-driven Controller Tuning with Guaranteed Stability: Application to Direct-drive Pick-and-place Robot.
Proceedings of the IEEE International Conference on Control Applications, 2010

2009
Velocity-Scheduling Control for a Unicycle Mobile Robot: Theory and Experiments.
IEEE Trans. Robotics, 2009

Neighbouring-extremal control for singular dynamic optimisation problems. Part I: single-input systems.
Int. J. Control, 2009

Neighbouring-extremal control for singular dynamic optimisation problems. Part II: multiple-input systems.
Int. J. Control, 2009

Optimizing control based on output feedback.
Computers & Chemical Engineering, 2009

Adaptation strategies for real-time optimization.
Computers & Chemical Engineering, 2009

Global stabilization of an inverted pendulum-Control strategy and experimental verification.
Autom., 2009

Dynamics and control of 2D SpiderCrane: A Lie-Bäcklund approach.
Proceedings of the European Control Conference, 2009

Quotient method for controlling the acrobot.
Proceedings of the 48th IEEE Conference on Decision and Control, 2009

2008
Control of the Toycopter Using a Flat Approximation.
IEEE Trans. Contr. Sys. Techn., 2008

Tracking the necessary conditions of optimality with changing set of active constraints using a barrier-penalty function.
Computers & Chemical Engineering, 2008

Closed-loop identification of multivariable systems: With or without excitation of all references?
Autom., 2008

Data-driven controller tuning with integrated stability constraint.
Proceedings of the 47th IEEE Conference on Decision and Control, 2008

2007
A numerical sufficiency test for the asymptotic stability of linear time-varying systems.
Autom., 2007

Correlation-based tuning of decoupling multivariable controllers.
Autom., 2007

Data-driven estimation of the infinity norm of a dynamical system.
Proceedings of the 46th IEEE Conference on Decision and Control, 2007

2006
Run-to-run control of blood glucose concentrations for people with type 1 diabetes mellitus.
IEEE Trans. Biomed. Engineering, 2006

Identification of multi-input systems: variance analysis and input design issues.
Autom., 2006

2003
Correlation-Based Tuning of a Restricted-Complexity Controller for an Active Suspension System.
Eur. J. Control, 2003

Erratum to "Dynamic optimization of batch processes I. Characterization of the nominal solution": [Computers and Chemical Engineering 27 (2003) 1-26].
Computers & Chemical Engineering, 2003

Dynamic optimization of batch processes: I. Characterization of the nominal solution.
Computers & Chemical Engineering, 2003

Erratum to "Dynamic optimization of batch processes II. Role of measurements in handling uncertainty": [Computers and Chemical Engineering 27 (2003) 27-44].
Computers & Chemical Engineering, 2003

Dynamic optimization of batch processes: II. Role of measurements in handling uncertainty.
Computers & Chemical Engineering, 2003

2002
Analysis of exclusively kinetic two-link underactuated mechanical systems.
Autom., 2002

1994
Obtaining Synergetic Behavior by Exploiting Relations in Distributed Robot Plans.
Proceedings of the 1994 International Conference on Robotics and Automation, 1994

1993
Failure Recovery of Flexible Production Systems through Cooperation of Distributed Agents.
Proceedings of the Knowledge Based Hybrid Systems, 1993

1992
Selection of input and output variables as a model reduction problem.
Autom., 1992


  Loading...