Win Tun Latt

According to our database1, Win Tun Latt authored at least 23 papers between 2006 and 2020.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2020
Visual Servoed Robotic Mouse Oocyte Rotation.
IEEE Trans. Biomed. Eng., 2020

2017
Autofocusing and Polar Body Detection in Automated Cell Manipulation.
IEEE Trans. Biomed. Eng., 2017

2016
A fully automated robotic system for three-dimensional cell rotation.
Proceedings of the 2016 IEEE International Conference on Robotics and Automation, 2016

2015
Visual Servoed Three-Dimensional Cell Rotation System.
IEEE Trans. Biomed. Eng., 2015

Automatic segmentation of zona pellucida and its application in cleavage-stage embryo biopsy position selection.
Proceedings of the 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2015

2012
A hand-held instrument for in vivo probe-based confocal laser endomicroscopy during Minimally Invasive Surgery.
Proceedings of the 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2012

A new hand-held force-amplifying device for micromanipulation.
Proceedings of the IEEE International Conference on Robotics and Automation, 2012

2011
A Hand-held Instrument to Maintain Steady Tissue Contact during Probe-Based Confocal Laser Endomicroscopy.
IEEE Trans. Biomed. Eng., 2011

Drift-Free Position Estimation of Periodic or Quasi-Periodic Motion Using Inertial Sensors.
Sensors, 2011

2010
Double adaptive bandlimited multiple Fourier linear combiner for real-time estimation/filtering of physiological tremor.
Biomed. Signal Process. Control., 2010

2009
Design and development of a low-cost flexure-based hand-held mechanism for micromanipulation.
Proceedings of the 2009 IEEE International Conference on Robotics and Automation, 2009

Identification of accelerometer orientation errors and compensation for acceleration estimation errors.
Proceedings of the 2009 IEEE International Conference on Robotics and Automation, 2009

2008
Adaptive filtering of physiological tremor for real-time compensation.
Proceedings of the IEEE International Conference on Robotics and Biomimetics, 2008

Adaptive estimation of EEG-rhythms for event classification.
Proceedings of the IEEE International Conference on Robotics and Biomimetics, 2008

Placement of accelerometers in a hand-held active tremor compensation instrument for high angular sensing resolution.
Proceedings of the IEEE International Conference on Robotics and Biomimetics, 2008

Physiological tremor sensing using only accelerometers for real-time compensation.
Proceedings of the IEEE International Conference on Robotics and Biomimetics, 2008

Kalman filtering of accelerometer and electromyography (EMG) data in pathological tremor sensing system.
Proceedings of the 2008 IEEE International Conference on Robotics and Automation, 2008

Adaptive rate-dependent feedforward controller for hysteretic piezoelectric actuator.
Proceedings of the 2008 IEEE International Conference on Robotics and Automation, 2008

2007
Design and implementation of a mechatronic device for wrist and elbow rehabilitation.
Proceedings of the 1st international convention on Rehabilitation engineering & assistive technology, 2007

Design and Calibration of an Optical Micro Motion Sensing System for Micromanipulation Tasks.
Proceedings of the 2007 IEEE International Conference on Robotics and Automation, 2007

Real-Time Disturbance Compensation with Accelerometers & Piezoelectric-Driven Mechanism.
Proceedings of the 7th IEEE International Symposium on Computational Intelligence in Robotics and Automation, 2007

Rate-Dependent Hysteresis Model of Piezoelectric using Singularity Free Prandtl-Ishlinskii Model.
Proceedings of the 7th IEEE International Symposium on Computational Intelligence in Robotics and Automation, 2007

2006
Modeling Piezoelectric Actuator Hysteresis with Singularity Free Prandtl-Ishlinskii Model.
Proceedings of the IEEE International Conference on Robotics and Biomimetics, 2006


  Loading...