Gary K. Fedder

Orcid: 0000-0002-2380-5210

Affiliations:
  • Carnegie Mellon University, Pittsburgh, USA


According to our database1, Gary K. Fedder authored at least 32 papers between 1996 and 2024.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Awards

IEEE Fellow

IEEE Fellow 2008, "For contributions to integrated micro-electro-mechanical-system processes and design methodologies".

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2024
A 46.6 μg/√Hz Single-Chip Accelerometer Exploiting a DTC-Assisted Chopper Amplifier.
IEEE J. Solid State Circuits, February, 2024

2023
High resolution focused non-invasive electrical stimulation of motor cortex in rodent model.
Proceedings of the 11th International IEEE/EMBS Conference on Neural Engineering, 2023

2020
A Reconfigurable High-Bandwidth CMOS-MEMS Capacitive Accelerometer Array with High-g Measurement Capability and Low Bias Instability.
Proceedings of the IEEE Symposium on VLSI Circuits, 2020

High-g Capacitive Accelerometer Arrays with Low Bias Instability.
Proceedings of the IEEE/ION Position, Location and Navigation Symposium, 2020

2019
Compliant adhesive cuff electrode for selective stimulation in rat vagus nerve.
Proceedings of the 2019 IEEE SENSORS, Montreal, QC, Canada, October 27-30, 2019, 2019

A High Dynamic Range CMOS-MEMS Accelerometer Array with Drift Compensation and Fine-Grain Offset Compensation.
Proceedings of the IEEE Custom Integrated Circuits Conference, 2019

2018
Parylene neural probe with embedded CMOS multiplexing amplifier.
Proceedings of the 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2018

2017
On-chip environmental sensors for bias drift compensation.
Proceedings of the 2017 IEEE SENSORS, Glasgow, United Kingdom, October 29, 2017

Ultra-low-power and high sensitivity resonant micromechanical receiver.
Proceedings of the 2017 IEEE SENSORS, Glasgow, United Kingdom, October 29, 2017

2016
Elastic ribbon-like piezoelectric energy harvester for wearable devices with stretchable surfaces.
Proceedings of the 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2016

A silicon neural probe fabricated using DRIE on bonded thin silicon.
Proceedings of the 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2016

2014
Demo hour.
Interactions, 2014

2013
Paper generators: harvesting energy from touching, rubbing and sliding.
Proceedings of the 26th Annual ACM Symposium on User Interface Software and Technology, 2013

Ultra-compliant neural probes are subject to fluid forces during dissolution of polymer delivery vehicles.
Proceedings of the 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2013

Ultra-low power frequency and duty-cycle modulated implantable pressure-temperature sensor.
Proceedings of the 2013 IEEE Biomedical Circuits and Systems Conference (BioCAS), Rotterdam, The Netherlands, October 31, 2013

2012
Statistical design and optimization for adaptive post-silicon tuning of MEMS filters.
Proceedings of the 49th Annual Design Automation Conference 2012, 2012

2010
Enhancing CMOS Using Nanoelectronic Devices: A Perspective on Hybrid Integrated Systems.
Proc. IEEE, 2010

2009
RF-CMOS-MEMS based frequency-reconfigurable amplifiers.
Proceedings of the IEEE Custom Integrated Circuits Conference, 2009

2008
Technologies for Cofabricating MEMS and Electronics.
Proc. IEEE, 2008

2007
Electrostatic latching for inter-module adhesion, power transfer, and communication in modular robots.
Proceedings of the 2007 IEEE/RSJ International Conference on Intelligent Robots and Systems, October 29, 2007

2006
The Effect of a Distributed Mass Loading on the Frequency Response of a MEMS Mesh Resonator.
Proceedings of the 28th International Conference of the IEEE Engineering in Medicine and Biology Society, 2006

2004
A low-noise low-offset capacitive sensing amplifier for a 50-μg√Hz monolithic CMOS MEMS accelerometer.
IEEE J. Solid State Circuits, 2004

2003
MEMS Fabrication.
Proceedings of the Proceedings 2003 International Test Conference (ITC 2003), Breaking Test Interface Bottlenecks, 28 September, 2003

2002
Micromachined high-Q inductors in a 0.18-μm copper interconnect low-k dielectric CMOS process.
IEEE J. Solid State Circuits, 2002

Schematic-based lumped parameterized behavioral modeling for suspended MEMS.
Proceedings of the 2002 IEEE/ACM International Conference on Computer-aided Design, 2002

2001
Micromachined high-Q inductors in 0.18 μm Cu interconnect low-K CMOS.
Proceedings of the IEEE 2001 Custom Integrated Circuits Conference, 2001

2000
Emerging simulation approaches for micromachined devices.
IEEE Trans. Comput. Aided Des. Integr. Circuits Syst., 2000

1999
Hierarchical Mixed-Domain Circuit Simulation, Synthesis and Extraction Methodology for MEMS.
J. VLSI Signal Process., 1999

Hierarchical Design and Test of Integrated Microsystems.
IEEE Des. Test Comput., 1999

Path toward future CAD environments for MEMS (tutorial abstract).
Proceedings of the 1999 IEEE/ACM International Conference on Computer-Aided Design, 1999

1997
Structured Design of Microelectromechanical Systems.
Proceedings of the 34st Conference on Design Automation, 1997

1996
Design of a modular tactile sensor and actuator based on an electrorheological gel.
Proceedings of the 1996 IEEE International Conference on Robotics and Automation, 1996


  Loading...