Li-Ren Huang

According to our database1, Li-Ren Huang authored at least 26 papers between 1995 and 2018.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2018
FMEDA-Based Fault Injection and Data Analysis in Compliance with ISO-26262.
Proceedings of the 48th Annual IEEE/IFIP International Conference on Dependable Systems and Networks Workshops, 2018

2017
Fast Physically Correct Refocusing for Sparse Light Fields Using Block-Based Multi-Rate View Interpolation.
IEEE Trans. Image Process., 2017

2016
Fast realistic block-based refocusing for sparse light fields.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2016

Invited - Wireless sensor nodes for environmental monitoring in internet of things.
Proceedings of the 53rd Annual Design Automation Conference, 2016

2015
An intelligent brake-by-wire system design and analysis in accordance with ISO-26262 functional safety standard.
Proceedings of the International Conference on Connected Vehicles and Expo, 2015

ECG noise thresholding based on moving average.
Proceedings of the IEEE International Conference on Consumer Electronics - Taiwan, 2015

2014
Parametric Fault Testing and Performance Characterization of Post-Bond Interposer Wires in 2.5-D ICs.
IEEE Trans. Comput. Aided Des. Integr. Circuits Syst., 2014

PLL-Assisted Timing Circuit for Accurate TSV Leakage Binning.
IEEE Des. Test, 2014

Assessing automotive functional safety microprocessor with ISO 26262 hardware requirements.
Proceedings of the Technical Papers of 2014 International Symposium on VLSI Design, 2014

A Class-D amplifier powered by embedded single-inductor bipolar-output power module with low common noise and dynamic voltage boosting technique.
Proceedings of the ESSCIRC 2014, 2014

Single inductor quad output switching converter with priority-scheduled program for fast transient and unlimited-load range in 40nm CMOS technology.
Proceedings of the ESSCIRC 2014, 2014

2013
Programmable Leakage Test and Binning for TSVs With Self-Timed Timing Control.
IEEE Trans. Comput. Aided Des. Integr. Circuits Syst., 2013

Oscillation-Based Prebond TSV Test.
IEEE Trans. Comput. Aided Des. Integr. Circuits Syst., 2013

Delay testing and characterization of post-bond interposer wires in 2.5-D ICs.
Proceedings of the 2013 IEEE International Test Conference, 2013

Mid-bond Interposer Wire Test.
Proceedings of the 22nd Asian Test Symposium, 2013

2012
A design for testability of non-volatile memory reliability test for automotive embedded processor.
Proceedings of the IEEE Asia Pacific Conference on Circuits and Systems, 2012

2007
Optimum power-saving method for power MOSFET width of DC/DC converters.
IET Circuits Devices Syst., 2007

2006
A 24mW 1.25Gb/s 13kΧ transimpedance amplifier using active compensation.
Proceedings of the 2006 IEEE International Solid State Circuits Conference, 2006

2005
A 3.5-Gb/s CMOS burst-mode laser driver with automatic power control using single power supply.
Proceedings of the International Symposium on Circuits and Systems (ISCAS 2005), 2005

10 Gb/s CMOS laser driver with 3.3 V<sub>pp</sub> output swing.
Proceedings of the IEEE 2005 Custom Integrated Circuits Conference, 2005

2003
10 Gb/s single-ended laser driver in 0.35μm SiGe BiCMOS technology.
Proceedings of the ESSCIRC 2003, 2003

1998
Fault management for adjustable pre-allocation wavelength division multi-access systems.
Proceedings of the 1998 IEEE International Conference on Communications, 1998

1997
Gauss-elimination-based generation of multiple seed-polynomial pairs for LFSR.
IEEE Trans. Comput. Aided Des. Integr. Circuits Syst., 1997

1996
Easily Testable Data Path Allocation Using Input/Output Registers.
Proceedings of the 5th Asian Test Symposium (ATS '96), 1996

An Efficient PRPG Strategy By Utilizing Essential Faults.
Proceedings of the 5th Asian Test Symposium (ATS '96), 1996

1995
A Gauss-elimination based PRPG for combinational circuits.
Proceedings of the 1995 European Design and Test Conference, 1995


  Loading...