Kai Tang

According to our database1, Kai Tang authored at least 132 papers between 1989 and 2019.

Collaborative distances:

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Other 

Links

On csauthors.net:

Bibliography

2019
Automatic Sweep Scan Path Planning for Five-Axis Free-Form Surface Inspection Based on Hybrid Swept Area Potential Field.
IEEE Trans. Automation Science and Engineering, 2019

Support-Free Layered Process Planning Toward 3 + 2-Axis Additive Manufacturing.
IEEE Trans. Automation Science and Engineering, 2019

Alternating Electric Field-Based Static Gesture-Recognition Technology.
Sensors, 2019

Correction: Tang, K., et al., A Novel Fingerprint Sensing Technology Based on Electrostatic Imaging. Sensors 2018, 18, 3050.
Sensors, 2019

Secure cloud computing model for communication network management.
Journal of Intelligent and Fuzzy Systems, 2019

Curved layer based process planning for multi-axis volume printing of freeform parts.
Computer-Aided Design, 2019

Body Sensor Network-Based Gait Quality Assessment for Clinical Decision-Support via Multi-Sensor Fusion.
IEEE Access, 2019

DV-NVLLC: Efficiently guaranteeing crash consistency in persistent memory via dynamic versioning.
Proceedings of the 2019 IEEE International Conference on Networking, 2019

Portable Photoacoustic Sensor for Noninvasive Glucose Monitoring.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2019

A Two-Stage Push-Pull Power Amplifier with Electro-Thermal Effects Study in 130 nm SOI CMOS for IEEE 802.11ac Applications.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2019

2018
S-LPM: segmentation augmented light-weighting and progressive meshing for the interactive visualization of large man-made Web3D models.
World Wide Web, 2018

A 16-mW 1-GS/s With 49.6-dB SNDR TI-SAR ADC for Software-Defined Radio in 65-nm CMOS.
IEEE Trans. VLSI Syst., 2018

Curved Reflection Symmetric Axes on Free-Form Surfaces and Their Extraction.
IEEE Trans. Automation Science and Engineering, 2018

Real-Time Hand Position Sensing Technology Based on Human Body Electrostatics.
Sensors, 2018

A Novel Fingerprint Sensing Technology Based on Electrostatic Imaging.
Sensors, 2018

Estimation of Temporal Gait Parameters Using a Human Body Electrostatic Sensing-Based Method.
Sensors, 2018

Aureole: a multi-perspective visual analytics approach for green cellular networks.
J. Visualization, 2018

Modeling of the Atomic Diffusion Coefficient in Nanostructured Materials.
Entropy, 2018

Optimized sequence planning for multi-axis hybrid machining of complex geometries.
Computers & Graphics, 2018

Multi-axis variable depth-of-cut machining of thin-walled workpieces based on the workpiece deflection constraint.
Computer-Aided Design, 2018

Automatic generation of efficient and interference-free five-axis scanning path for free-form surface inspection.
Computer-Aided Design, 2018

Morley-Wang-Xu element methods with penalty for a fourth order elliptic singular perturbation problem.
Adv. Comput. Math., 2018

A 253mW/channel 4TX/4RX pulsed chirping phased-array radar TRX in 65nm CMOS for X-band synthetic-aperture radar imaging.
Proceedings of the 2018 IEEE International Solid-State Circuits Conference, 2018

A DDS-Driven ADPLL Chirp Synthesizer with Ramp-Interpolating Linearization for FMCW Radar Application in 65nm CMOS.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2018

A DLL-based Configurable Multi-Phase Clock Generator for True-Time-Delay Wideband FMCW Phased-Array in 40nm CMOS.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2018

A Ku-band FMCW Radar on Chip for Wireless Micro Physiological Signal Monitoring by Interferometry Phase Analysis.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2018

2017
Automatic Generation of Five-Axis Continuous Inspection Paths for Free-Form Surfaces.
IEEE Trans. Automation Science and Engineering, 2017

Cutting force and machine kinematics constrained cutter location planning for five-axis flank milling of ruled surfaces.
J. Computational Design and Engineering, 2017

Kernel fusion based extreme learning machine for cross-location activity recognition.
Information Fusion, 2017

Efficiency-optimal iso-planar tool path generation for five-axis finishing machining of freeform surfaces.
Computer-Aided Design, 2017

Key Lightweighting Technologies of Web3D for Virtual Training of Metro Station Fire Evacuation.
Proceedings of the E-Learning and Games - 11th International Conference, 2017

Networked gesture tracking system based on immersive real-time interaction.
Proceedings of the 21st IEEE International Conference on Computer Supported Cooperative Work in Design, 2017

2016
A Flexible-Weighted Nonbinary Searching Technique for High-Speed SAR-ADCs.
IEEE Trans. VLSI Syst., 2016

A Robust Divide and Conquer Algorithm for Progressive Medial Axes of Planar Shapes.
IEEE Trans. Vis. Comput. Graph., 2016

Styling Evolution for Tight-Fitting Garments.
IEEE Trans. Vis. Comput. Graph., 2016

Hardening silicon-on-insulator nMOSFETs by multiple-step Si+ implantation.
Microelectronics Reliability, 2016

Five-axis tool path generation based on machine-dependent potential field.
Int. J. Computer Integrated Manufacturing, 2016

A non-contact human-computer interaction application design based on electrostatic current of human body.
IJCAT, 2016

Lightweighting for Web3D visualization of large-scale BIM scenes in real-time.
Graphical Models, 2016

Sweep scan path planning for efficient freeform surface inspection on five-axis CMM.
Computer-Aided Design, 2016

Soft damper for quick stabilization of soft robotic actuator.
Proceedings of the IEEE International Conference on Real-time Computing and Robotics, 2016

13.2 A Ku-band 260mW FMCW synthetic aperture radar TRX with 1.48GHz BW in 65nm CMOS for micro-UAVs.
Proceedings of the 2016 IEEE International Solid-State Circuits Conference, 2016

An analog baseband chain of synthetic aperture radar receiver.
Proceedings of the International Symposium on Integrated Circuits, 2016

A CMOS digital-controlled oscillator for All-digital PLL frequency synthesizer.
Proceedings of the International Symposium on Integrated Circuits, 2016

Millimeter wave transformer coupled low-power and broadband power amplifiers.
Proceedings of the International Symposium on Integrated Circuits, 2016

Live demonstration: A Ku-band FMCW synthetic aperture radar transceiver for micro-UAVs.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2016

A high gain decibel-linear programmable gain amplifier of synthetic aperture radar receiver.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2016

Design considerations of Ku-band high gain wideband CMOS power amplifier for FMCW radar application.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2016

A 10-bit 1GS/s 4-way TI SAR ADC with tap-interpolated FIR filter based time skew calibration.
Proceedings of the IEEE Asian Solid-State Circuits Conference, 2016

2015
An Improved Algorithm for the Automated Design of Large-Scaled Robot Skin.
IEEE Trans. Automation Science and Engineering, 2015

Five-axis finishing tool path generation for a mesh blade based on linear morphing cone.
J. Computational Design and Engineering, 2015

Collision-free tool orientation optimization in five-axis machining of bladed disk.
J. Computational Design and Engineering, 2015

Approximate Delaunay mesh reconstruction and quality estimation from point samples.
J. Computational Applied Mathematics, 2015

Polynomial local shape descriptor on interest points for 3D part-in-whole matching.
Computer-Aided Design, 2015

A digital time skew calibration technique for time-interleaved ADCs.
Proceedings of the 2015 IEEE International Symposium on Circuits and Systems, 2015

A jumping robot using soft pneumatic actuator.
Proceedings of the IEEE International Conference on Robotics and Automation, 2015

Extending LTE to unlicensed band - Merit and coexistence.
Proceedings of the IEEE International Conference on Communication, 2015

Boundary-Conformed Tool Path Generation Based on Global Reparametrization.
Proceedings of the 14th International Conference on Computer-Aided Design and Computer Graphics, 2015

2014
Accurate segmentation of moving objects and their shadows via brightness ratios and movement patterns.
Proceedings of the 2014 IEEE Intelligent Vehicles Symposium Proceedings, 2014

Analysis and modelling on CMOS spiral inductor with impact of metal dummy fills.
Proceedings of the 2014 International Symposium on Integrated Circuits (ISIC), 2014

A broadband CMOS LC voltage-controlled oscillator for FMCW synthesizer.
Proceedings of the 2014 International Symposium on Integrated Circuits (ISIC), 2014

A semi-analytical extraction method for transformer model.
Proceedings of the 2014 International Symposium on Integrated Circuits (ISIC), 2014

Joint multi-CDN and LT-coding for video transport over HTTP.
Proceedings of the IEEE International Symposium on Circuits and Systemss, 2014

2013
The complexity of geodesic Voronoi diagrams on triangulated 2-manifold surfaces.
Inf. Process. Lett., 2013

Modelling and simulation of thunderstorm electric field.
IJMIC, 2013

Quasi-developable surface modeling of contours with curved triangular patches.
Computers & Graphics, 2013

Global obstacle avoidance and minimum workpiece setups in five-axis machining.
Computer-Aided Design, 2013

G2 quasi-developable Bezier surface interpolation of two space curves.
Computer-Aided Design, 2013

Improving the Capacity of an Existing Cellular Network Using Distributed Antenna Systems and Right-of-Way Cell Sites.
Proceedings of the 78th IEEE Vehicular Technology Conference, 2013

2012
Accurate detection of SNPs using base-specific cleavage and mass spectrometry.
Proceedings of the 2012 IEEE International Conference on Bioinformatics and Biomedicine, 2012

2011
Construction of Iso-Contours, Bisectors, and Voronoi Diagrams on Triangulated Surfaces.
IEEE Trans. Pattern Anal. Mach. Intell., 2011

Industrial design using interpolatory discrete developable surfaces.
Computer-Aided Design, 2011

Improving the dynamics of five-axis machining through optimization of workpiece setup and tool orientations.
Computer-Aided Design, 2011

2-Manifold Surface Sampling and Quality Estimation of Reconstructed Meshes.
Proceedings of the Eighth International Symposium on Voronoi Diagrams in Science and Engineering, 2011

Application Centric Lifecycle Framework in Cloud.
Proceedings of the IEEE 8th International Conference on e-Business Engineering, 2011

Research on Real Estate Monitoring and Forewarning System Based on System Dynamics Model.
Proceedings of the Applied Informatics and Communication - International Conference, 2011

A new partitioning based algorithm for document clustering.
Proceedings of the Eighth International Conference on Fuzzy Systems and Knowledge Discovery, 2011

2010
Some notes on maximal arc intersection of spherical polygons: its NP\mathcal{NP} -hardness and approximation algorithms.
The Visual Computer, 2010

A fully geometric approach for developable cloth deformation simulation.
The Visual Computer, 2010

Pattern computation for compression garment by a physical/geometric approach.
Computer-Aided Design, 2010

Performance analysis of dynamic bandwidth allocation scheme based on QoS in satellite networks.
Proceedings of the International Conference on Wireless Communications and Signal Processing, 2010

Framework for SaaS Management Platform.
Proceedings of the IEEE 7th International Conference on e-Business Engineering, 2010

Research on Tenant Placement Based on Business Relations.
Proceedings of the IEEE 7th International Conference on e-Business Engineering, 2010

2009
Biorthogonal wavelet construction for hybrid quad/triangle meshes.
The Visual Computer, 2009

Quasi-Developable Mesh Surface Interpolation via Mesh Deformation.
IEEE Trans. Vis. Comput. Graph., 2009

A Pattern-Based Design Approach for Subscription Management of Software as a Service.
Proceedings of the 2009 IEEE Congress on Services, Part I, 2009

On the performance of maximal intersection of spherical polygons by arcs.
Proceedings of the 11th International Conference on Computer-Aided Design and Computer Graphics, 2009

2008
Biorthogonal wavelets based on gradual subdivision of quadrilateral meshes.
Computer Aided Geometric Design, 2008

Five-axis tool path generation for a flat-end tool based on iso-conic partitioning.
Computer-Aided Design, 2008

Pattern computation for compression garment.
Proceedings of the 2008 ACM Symposium on Solid and Physical Modeling, 2008

Stabbing Convex Polygons with a Segment or a Polygon.
Proceedings of the Algorithms, 2008

2007
Automatic generation of gouge-free and angular-velocity-compliant five-axis toolpath.
Computer-Aided Design, 2007

Woven model based geometric design of elastic medical braces.
Computer-Aided Design, 2007

Modeling dynamic developable meshes by the Hamilton principle.
Computer-Aided Design, 2007

Generating strictly non-self-overlapping structured quadrilateral grids.
Computer-Aided Design, 2007

A Supply Chain Network Design Model for Deteriorating Items.
Proceedings of the Computational Intelligence and Security, International Conference, 2007

Solving Intersection Problem of a Canal Surface and a Sphere Analytically.
Proceedings of the 2007 International Conference on Computer Graphics & Virtual Reality, 2007

Solving Intersection Problem of A Canal Surface and A Sphere Analytically.
Proceedings of the 2007 International Conference on Computer Graphics & Virtual Reality, 2007

2006
Efficient wavelet construction with Catmull-Clark subdivision.
The Visual Computer, 2006

Minimum Area Convex Packing of Two Convex Polygons.
Int. J. Comput. Geometry Appl., 2006

Robustly Computing Intersection Curves of Two Canal Surfaces with Quadric Decomposition.
Proceedings of the Computational Science, 2006

An Efficient Implementation of RBF-Based Progressive Point-Sampled Geometry.
Proceedings of the Geometric Modeling and Processing, 2006

Dynamic Medial Axes of Planar Shapes.
Proceedings of the Advances in Computer Graphics, 2006

2005
Multiresolution Shape Modeling and Editing in Reverse Engineering.
Int. J. Image Graphics, 2005

An optimization algorithm for free-form surface partitioning based on weighted gaussian image.
Graphical Models, 2005

Sketch-based free-form shape modelling with a fast and stable numerical engine.
Computers & Graphics, 2005

Freeform surface flattening based on fitting a woven mesh model.
Computer-Aided Design, 2005

Non-self-overlapping Hermite interpolation mapping: a practical solution for structured quadrilateral meshing.
Computer-Aided Design, 2005

Modeling wrinkles on smooth surfaces for footwear design.
Computer-Aided Design, 2005

Revolute Quadric Decomposition of Canal Surfaces and Its Applications.
Proceedings of the Computational Science, 2005

2004
Achieving developability of a polygonal surface by minimum deformation: a study of global and local optimization approaches.
The Visual Computer, 2004

Biconic subdivision of surfaces of revolution and its applications in intersection problems.
The Visual Computer, 2004

A geometric method for determining intersection relations between a movable convex object and a set of planar polygons.
IEEE Trans. Robotics, 2004

Multiresolution Free Form Object Modeling with Point Sampled Geometry.
J. Comput. Sci. Technol., 2004

Reduce the stretch in surface flattening by finding cutting paths to the surface boundary.
Computer-Aided Design, 2004

Parametric representation of a surface pencil with a common spatial geodesic.
Computer-Aided Design, 2004

Computing Planar Sections of Surfaces of Revolution with Revolute Quadric Decomposition.
Proceedings of the 2004 International Conference on Shape Modeling and Applications (SMI 2004), 2004

Developability-preserved free-form deformation of assembled patches.
Proceedings of the Ninth ACM Symposium on Solid Modeling and Applications, 2004

Efficient and Stable Numerical Algorithms on Equilibrium Equations for Geometric Modeling.
Proceedings of the 2004 Geometric Modeling and Processing (GMP 2004), 2004

2003
Manifold-guaranteed out-of-core simplification of large meshes with controlled topological type.
The Visual Computer, 2003

MLSE receiver for direct-sequence spread-spectrum systems on a multipath fading channel.
IEEE Trans. Communications, 2003

Optimal connection of loops in laminated object manufacturing.
Computer-Aided Design, 2003

Maximal intersection of spherical polygons by an arc with applications to 4-axis machining.
Computer-Aided Design, 2003

Traversing the machining graph of a pocket.
Computer-Aided Design, 2003

2001
A comparison of long versus short spreading sequences in coded asynchronous DS-CDMA systems.
IEEE Journal on Selected Areas in Communications, 2001

Combined MMSE interference suppression and turbo coding for a coherent DS-CDMA system.
IEEE Journal on Selected Areas in Communications, 2001

1999
On Computing Contact Configurations of a Curved Chain.
Graphical Models and Image Processing, 1999

1998
An algorithm for reducing tool retractions in zigzag pocket machining.
Computer-Aided Design, 1998

1997
Computing planar swept polygons under translation.
Computer-Aided Design, 1997

1995
Offsetting surface boundaries and 3-axis gouge-free surface machining.
Computer-Aided Design, 1995

1994
Scallop hull and its offset.
Computer-Aided Design, 1994

1989
On the intersection of a set of direction cones.
Computer Vision, Graphics, and Image Processing, 1989


  Loading...