Jianguo Yang

According to our database1, Jianguo Yang authored at least 40 papers between 2004 and 2018.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.



In proceedings 
PhD thesis 


On csauthors.net:


A new recommendation system on the basis of consumer initiative decision based on an associative classification approach.
Industrial Management and Data Systems, 2018

A Physically Unclonable Function with BER < 0.35% for Secure Chip Authentication Using Write Speed Variation of RRAM.
Proceedings of the 48th European Solid-State Device Research Conference, 2018

Nonvolatile Crossbar 2D2R TCAM with Cell Size of 16.3 F2 and K-means Clustering for Power Reduction.
Proceedings of the IEEE Asian Solid-State Circuits Conference, 2018

Dynamic Data-Dependent Reference to Improve Sense Margin and Speed of Magnetoresistive Random Access Memory.
IEEE Trans. on Circuits and Systems, 2017

An improved ant colony algorithm for robot path planning.
Soft Comput., 2017

A small area and low power true random number generator using write speed variation of oxidebased RRAM for IoT security application.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2017

Low-Power Variation-Tolerant Nonvolatile Lookup Table Design.
IEEE Trans. VLSI Syst., 2016

A Logic Resistive Memory Chip for Embedded Key Storage With Physical Security.
IEEE Trans. on Circuits and Systems, 2016

Error Ellipsoid Analysis for the Diameter Measurement of Cylindroid Components Using a Laser Radar Measurement System.
Sensors, 2016

A self-adaptive write driver with fast termination of step-up pulse for ReRAM.
IEICE Electronic Express, 2016

Long Range Dependence Prognostics for Bearing Vibration Intensity Chaotic Time Series.
Entropy, 2016

Novel 3D horizontal RRAM architecture with isolation cell structure for sneak current depression.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2016

A compact pico-second in-situ sensor using programmable ring oscillators for advanced on chip variation characterization in 28nm HKMG.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2016

Research on parameters of EDEM simulations based on the angle of repose experiment.
Proceedings of the 20th IEEE International Conference on Computer Supported Cooperative Work in Design, 2016

Impacts of external magnetic field and high temperature disturbance on MRAM reliability based on FPGA test platform.
Proceedings of the 2015 IEEE 11th International Conference on ASIC, 2015

A low cost and high reliability true random number generator based on resistive random access memory.
Proceedings of the 2015 IEEE 11th International Conference on ASIC, 2015

Research on harmonic compensation for flux and current of permanent magnet synchronous motor.
Proceedings of the IEEE International Conference on Advanced Intelligent Mechatronics, 2015

Comprehensive Errors Prediction and Compensation System for CNC Turning Based on the Neural Network and Visual Basic.
Proceedings of the Enterprise Systems Conference, 2014

An Improved Method for Straightness Error Modeling and Compensation in CNC Machining Center.
Proceedings of the Enterprise Systems Conference, 2014

A 0.13 µm 8 Mb Logic-Based Cux Siy O ReRAM With Self-Adaptive Operation for Yield Enhancement and Power Reduction.
J. Solid-State Circuits, 2013

Optimization of Integrated Pollutants Control Equipment by Computer Information Processing Technology.
JNW, 2013

Integrated Pollutants Control Equipment Optimization with Fluidized Bed Absorber Based on Flow Field Simulation.
Proceedings of the Information Computing and Applications - 4th International Conference, 2013

A 2Mb ReRAM with two bits error correction codes circuit for high reliability application.
Proceedings of the IEEE 10th International Conference on ASIC, 2013

A rule-based intelligent method for fault diagnosis of rotating machinery.
Knowl.-Based Syst., 2012

Optimization of Image Mosaic Algorithm for Large Workpiece Based on Multi-scale and Multi-resolution Search Strategy.
Proceedings of the Second International Conference on Digital Manufacturing and Automation, 2011

The development of fault diagnosis system for diesel engine based on fuzzy logic.
Proceedings of the Eighth International Conference on Fuzzy Systems and Knowledge Discovery, 2011

An Improved Sub-Pixel Location Method for Image Measurement.
Proceedings of the Advances in Computer Science, Environment, Ecoinformatics, and Education, 2011

A HIL Model with PAC for Large Low-speed HPCR Marine Diesel Engine.
Proceedings of the 2010 International Conference on Modeling, 2010

Design and Intelligent Control of a Piano Playing Robot.
I. J. Information Acquisition, 2009

A Novel Speed Observer Based on Parameter-optimized MRAS for PMSMs.
Proceedings of the IEEE International Conference on Networking, Sensing and Control, 2008

Macro-micro Driven Ultra-Precision Positioning Stage for Conventional Grinder.
Proceedings of the Intelligent Robotics and Applications, First International Conference, 2008

The Research of Dual NURBS Curves Interpolation Algorithm for High-Speed Five-Axis Machining.
Proceedings of the Intelligent Robotics and Applications, First International Conference, 2008

A biological intelligent scheduling algorithm for scheduling with batch size and non-cutting time consideration.
IJMTM, 2007

A sliding model speed/position observer integrated with a PI controller for PM synchronous motors.
Proceedings of the IEEE International Conference on Robotics and Biomimetics, 2007

An order allocation model in virtual enterprises based on industrial clusters.
Proceedings of the ICEIS 2007, 2007

Tool Condition Monitoring Based on Fractal and Wavelet Analysis by Acoustic Emission.
Proceedings of the Computational Science and Its Applications, 2007

Application of Grey System Model to Thermal Error Modeling on Machine Tools.
Proceedings of the Knowledge Enterprise: Intelligent Strategies in Product Design, 2006

Estimating pedestrian delays at signalized intersections in developing cities by Monte Carlo method.
Mathematics and Computers in Simulation, 2005

A Numerical Model for Estimating Pedestrian Delays at Signalized Intersections in Developing Cities.
Proceedings of the Computational and Information Science, First International Symposium, 2004

Modeling and Simulation of Red Light Running Violation at Urban Intersections.
Proceedings of the Systems Modeling and Simulation: Theory and Applications, 2004